User manual CASIO ID-13

[. . . ] USER'S GUIDE ID-13 · A sticker is affixed to the display of this clock when you purchase it. Be sure to remove the sticker before using the clock. · Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. PM indicator Current time (Hour, minutes, seconds) DATE (month - date) Day of the week Current Temperature Current Humidity GENERAL GUIDE 1 Time Set buttons Use these buttons to set the current time. [. . . ] 4 HYGROMETER FUNCTION · A built-in sensor measures humidity and shows the measured value on the display. · The humidity display shows "LO" for humidity below 10% and "HI" for humidity above 95%. Year Setting Screen 12-hour/24-hour Timekeeping Screen BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. Pressing down lightly on the battery compartment cover, slide it downwards and remove it. Make sure that their positive (+) and negative (­) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. Be sure to press the RESET button (3) after replacing batteries. 3 3 Battery precautions Be sure to load the batteries with their positive (+) and negative (­) ends facing correctly. Replace the batteries at least once a year, even if the current batteries are working properly. Never charge the batteries that come with the clock. Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. · The batteries that come with the clock lose some of their power during transport and storage. · Never mix old and new batteries, or batteries of different brands. · · · · Month and Day Setting Screen Time Setting Screen 2. [. . . ] · Each press of + or ­ while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour and 24-hour timekeeping. After making the settings you want, use the SET button (2) to display the Normal Timekeeping Screen. 2 · The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. 2 [. . . ]