User manual CASIO LC-1000T-S

[. . . ] If anything is missing, contact your original retailer. Digital camera Rechargeable lithium ion battery (NP-130) Charger unit (BC-130L) To attach the strap to the camera * The shape of the power cord plug varies according to country or geographic area. 1 2 Strap Attach strap here. Power cord USB cable AV cable CD-ROM Basic Reference 2 Read this first! · The contents of this manual and the bundled Basic Reference are subject to change without notice. · The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. · Any copying of the contents of this User's Guide, either in part or its entirety, is forbidden. [. . . ] The extracted subject image will appear on the monitor screen. If you selected "Moving Subject", the subject image will be moving on the display. · You can interrupt an ongoing subject extraction process (steps 9 through 11) at any time by pressing [MENU]. 11. IMPORTANT! · When shooting the subject image, shoot against a white wall or some other surface of a color that is different from that of the subject. The camera will not be able to crop the subject image properly if it is the same or similar color as the background. · The camera may not be able to cleanly crop a subject that is not clearly defined on the monitor screen due to backlighting, shadows, light smear, insufficient lighting, etc. When shooting the subject, make sure that it is clearly defined and outlined on the monitor screen. · The background you shoot in step 8 of the above procedure is not saved. Only the cropped subject image is saved. 110 Dynamic Photo Extracting Text from an Image You can write text on a blank sheet of paper, shoot an image of it, and then extract the text for insertion into an image. 1. 7. In the REC mode, set the mode dial to b (BEST SHOT). Use [8] and [2] to select the bottom Control Panel option (BS) and then press [SET] (page 33). Use [8], [2], [4], and [6] to select the "Dynamic Photo" scene and then press [SET]. · You can specify which images you want to print, the number of copies, and date stamp settings before printing (page 117). 114 Printing Connecting Directly to a PictBridge Compatible Printer You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer. . To set up the camera before connecting to a printer 1. 3. Turn on the camera and press [MENU]. On the "Set Up" tab, select "USB" and then press [6]. Use [8] and [2] to select "PTP (PictBridge)", and then press [SET]. . Connecting the Camera to a Printer Use the USB cable that USB cable (included with camera) comes bundled with the camera to connect the Large connector camera to your printer's USB port. USB · The camera does not draw power over the USB port USB cable. Make sure the camera's battery is sufficiently charged before connecting. Small connector · Make sure that you insert the cable connector into [USB/AV] the USB/AV port until port you feel it click securely into place. Failure to Making sure that the 6 mark on the camera is aligned insert the connector fully with the 4 mark of the USB cable connector, connect the can result in poor cable to the camera. · Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration. [. . . ] You also can specify a stationary subject (one frame only) in addition to a moving subject. Perform the following procedure when you want to change the subject type. 1. Before shooting the subject in step 3 under "Step 1: Shoot the subject. " (page 6), press [SET]. 2. Use [8] and [2] to select "Subject Type" and then press [SET]. [. . . ]