User manual CASIO MONTRE DATA-BANK

[. . . ] 2700 ABOUT THIS MANUAL 2700-1 · Button operations are indicated using the letters shown in the illustration. · Depending on the model of your watch, display text appears either as dark figures on a light background (positive), or light figures on a dark background (negative). All sample displays in this manual are shown in positive. · For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. [. . . ] · To return to the Timekeeping Mode, press C. 2700-2 WORLD TIME World Time shows the current time in 50 cities (27 time zones) around the world. · All of the operations in this section are performed in the World Time Mode, which you enter by pressing C. To view the time in another city code In the World Time Mode, press D to scroll forward through the city codes. NOC Code City code To recall Data Bank records In the Data Bank Mode, press D to scroll forward through Data Bank records on the display. · The name and/or telephone number of the selected Data Bank record scrolls on the Data Bank record screen. The symbol indicates the first character of the name or telephone number follows next. · Each press of A in the Data Bank Mode changes the scroll operation as shown below. Name scrolls Number scrolls Name stops Number scrolls Name scrolls Number stops Time Mode indicator NOC code Current time in the zone of the selected city code · Selecting a city code causes the NOC code screen to appear first, followed a short time later by the time screen. · NOC codes are the abbreviations designating the National Olympic Committee for each geographic area (as of December 2000). · For full information about city codes, see the "CITY CODE TABLE". · If the current time shown for a city is wrong, check your Timekeeping Mode time and Home City code settings and make the necessary changes. To edit a Data Bank record 1. In the Data Bank Mode, scroll through the records and display the one you want to edit. Hold down A until the flashing cursor appears on the display. Use C to move the flashing to the character you want to change. · For details on inputting characters, see "To create a new Data Bank record" (step 3 for name input and 7 for number input). After making the changes that you want, press A to store them and return to the Data Bank record screen. In the Data Bank Mode, scroll through the records and display the one you want to delete. Hold down A until the flashing cursor appears on the display. Press B and D at the same time to delete the record. · The message "CLR" appears to indicate that the record is being deleted. After the record is deleted, the cursor appears on the display, ready for input. Input data or press A to return to the Data Bank record screen. To toggle World Time Mode times between standard time and Daylight Saving Time In the World Time Mode, hold down A for about two seconds to toggle between Daylight Saving Time (DST displayed) and standard time (DST not displayed). · The above operation toggles all World Time city codes between Daylight Saving Time and standard time. Note that you cannot make settings for individual city codes. ALARMS DATA BANK MODE Name Mode indicator Telephone number The Data Bank Mode lets you store up to 30 records, each containing name and telephone number data. Records are automatically sorted based on the characters of the name. [. . . ] · When the cursor is located at the eighth space of the name area, moving the cursor to the right causes it to jump to the first digit of the number. When the cursor is at the 16th digit of the number, moving it to the right (by pressing C) causes it to jump to the first character in the name. Use D and B to change the character (hyphen, number, space, or plus) at the cursor position in the number area. The character changes in the following sequence. · To set an alarm that does not include a day of the week (daily alarm), set "­ ­ ­" for the day of the week. [. . . ]