User manual CASIO PRIVIA PX-3S

[. . . ] ES Please keep all information for future reference. Guarde toda documentación para futuras consultas. Safety Precautions Before trying to use the piano, be sure to read the separate "Safety Precautions". Precauciones de seguridad Antes de intentar usar el piano, asegúrese de leer las "Precauciones de seguridad" separadas. PX3ES1C Español USER'S GUIDE GUÍA DEL USUARIO English TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT SAFETY INSTRUCTIONS 1. Install in accordance with the manufacturer's instructions. [. . . ] · The following shows how the display would appear if you select Bank 3, Area 7. · You can specify up to 12 characters for a bank name. 4. 5. After the name is the way you want, press the dl (ENTER) button. In response to the confirmation message ("Sure?") that appears, press the bt (YES) button to apply the change or the bt (NO) button to return to the screen in step 3 of this procedure without changing anything. 3. NOTE · To display a bank name, hold down the br (REGISTRATION) button on the registration mode screen. E-35 English While holding down the dm (STORE) button, press one of the number buttons (ck (1) through cr (8)) to specify the number of the area (1 to 8) where you want to save the registration data. To rename a registration memory bank 1. While holding down the bs (FUNCTION) button, press the br (REGISTRATION) button. Using Registration Memory Saving Registration Memory Bank Data to a File Registration data can be stored to a file in the Digital Piano's internal memory area or on an SD card. You can store the registration data in a single registration memory bank (eight areas) or the data in all of the registration memory banks (64 areas) to a file. NOTE 3. Depending on the type of operation you want to perform, use the ct (u) and dk (i) buttons to display one of the screens shown below. To save the data in a single bank · When you save registration memory bank data to a file, a file name is assigned automatically in accordance with the following rules. · If you save the data in a single bank, the file name will be in the format: <first 6 characters of bank name><2-digit number specified by you>. CB6. · If you save the data in all the banks, the file name will be in the format: <REGIST><2-digit number specified by you>. CR6. · Before saving registration memory bank data to an SD card, be sure to first read the important information contained in the following sections of this user's guide. · "Card and Card Slot Precautions" (page E-46) · "To load and remove a memory card" (page E-46) · "To format a memory card" (page E-46) To save the data in all banks 4. 5. Use the bt (w, q) buttons to specify the two-digit number you want to append to the name of the file. Press the dl (ENTER) button. · This saves the file. · The message "Replace?" will appear if a file with the same name already exists. If you want to replace the existing file with the one you are saving, press bt (YES). Press bt (NO) to return to the screen in step 4 of this procedure without saving. To save registration memory bank data to a file 1. Depending on where you want to save the data file, perform one of the steps shown below. Perform this operation: Remove the SD card from the Digital Piano's card slot. Insert the SD card into the Digital Piano's card slot. 6. To exit the LOAD/SAVE mode, press the cs (EXIT) button. If you are saving the file here: Internal area SD card NOTE 2. While holding down the bs (FUNCTION) button, press the bl (LOAD/SAVE) button. · This enters the LOAD/SAVE mode. · A registration memory bank data file saved to an SD card will be placed in the MUSICDAT folder. The MUSICDAT folder is created automatically when you format the memory card on the Digital Piano (page E-46). Note that load, delete, and rename operations cannot be performed on files that are not inside the MUSICDAT folder, or on files in folders that are inside the MUSICDAT folder. Keep this restriction in mind whenever handling SD card files with your computer. E-36 Using Registration Memory To recall registration memory bank data from a file 7. If the file is located here: Internal area SD card Perform this operation: Remove the SD card from the Digital Piano's card slot. Insert the SD card into the Digital Piano's card slot. file into the bank(s) and exits the LOAD/SAVE mode. 2. 3. Press the br (REGISTRATION) button so the lamp below it is lit. If you are recalling a file that contains data for a single bank, use the bt (w, q) buttons to scroll through the bank numbers (1 through 8) until the one to which you want to recall the data is displayed. · If you are recalling a file that contains data for all banks, you can skip this step. 4. 5. While holding down the bs (FUNCTION) button, press the bl (LOAD/SAVE) button. · This enters the LOAD/SAVE mode. Depending on the type of operation you want to perform, use the ct (u) and dk (i) buttons to display one of the screens shown below. To recall a file that contains data for a single bank To recall a file that contains data for all banks 6. Use the bt (w, q) buttons to display the file that contains the data you want to recall, and then press the dl (ENTER) button. · This will cause the message "Replace?" to appear. · To cancel the recall operation and exit the LOAD/ SAVE mode, press the cs (EXIT) button. E-37 English 1. Depending on where the file is located, perform one of the steps shown below. To replace the registration data currently in the bank(s) you selected with the registration data in the file, press the bt (YES) button. [. . . ] Setting a positive value causes the wah filter to open in direct proportion with the level of the input signal, producing a bright sound. Setting a negative value causes the wah filter to close in direct proportion with the level of the input signal, producing a dark sound. Even when the wah filter is closed, high level input will cause it to reopen. *** Skip (Off, On) This parameter is included in M05, M06 (Phaser Skip), M08 (Wah Skip), etc. It makes it possible for one of the effects of a multi effect (such a Wah in the case of Wah Skip) to be bypassed. [. . . ]