User manual CASIO QV-10

[. . . ] Liquid Crystal Digital Camera QV-10 Liquid Crystal Digital Camera s Before using the QV-10. . . Note the following precautions before attempting to use the QV-10. assumes no responsibility for any damage or loss resulting from the use of this manual. assumes no responsibility for any loss or claims by third parties which may arise through the use of the QV-10. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. [. . . ] · Do not apply excessive force when rotating the lens body. Doing so can cause serious damage to the lens. · Do not carry the camera or move it around while holding onto only the lens body. · Return the lens body to its normal position (with the lens pointing from the front of the camera) before storing the camera. 39 40 Recording Images Operation Notes · Exposure adjustment is generally expressed in terms of an exposure adjustment value. The exposure adjustment value is always set to zero whenever you turn on the camera. · The exposure adjustment value is changed by 0. 25 with each press of [+] or [­]. · The exposure adjustment value automatically reverts to zero whenever the shutter button is pressed. To reset the exposure adjustment value to zero without pressing the shutter button, turn the camera off and on again, or change the position of the function switch to PLAY and then back to REC. Exposure Adjustment This camera features an automatic exposure (AE) function that automatically changes the shutter speed in accordance with lighting. In addition, you can also manually adjust the exposure to compensate for backlighting, indirect indoor lighting, dark backgrounds, and other special conditions. To manually adjust the exposure 1. · Set the function switch to the REC position. Use the [+] and [­] buttons to manually adjust the exposure. · Pressing [+] makes the image on the LCD brighter. Use it to adjust for dim indoor lighting and backlighting. Pressing [­] makes the image on the LCD darker. Use it to adjust for bright sunlight. Changing the Aperture Setting There are two aperture settings you can use to match lighting conditions. Use the aperture switch to change the aperture setting. · Use the [ ] (F8) setting to decrease exposure. This setting works best outdoors and with back lit images. · Use the [ ] (F2) setting to increase exposure. This setting works best indoors. · Note · Also see page 45 for information about exposure warning indicators. 3. After adjusting the exposure, press the shutter button to record the image. 41 42 Recording Images Operation · The image number appears in the upper right corner of the LCD. It indicates the number of the next image that will be recorded. The number 21, for example, indicates that there are 20 images in memory, and the next image will be number 21. [. . . ] Pages must be deleted (page 70) before further recording is possible. Contact your dealer or an authorized CASIO service provider. Signal System . . . . . . . . . Built-in 16-Mbit flash memory Number of Pages . . . . Single page; All pages (with page protect feature) Imaging Device . . . . . . . [. . . ]