User manual CASIO QW-2973

[. . . ] Press the SET button (3) to cycle through the setting screens as shown below. 3 Normal Timekeeping Screen Press to close. Front cover Year Setting Screen 12-hour/24-hour Timekeeping Screen · A sticker is affixed to the display of this clock when you purchase it. Be sure to remove the sticker before using the clock. [. . . ] · Open the front cover and swing it to the back of the clock as shown in the illustration. Do not apply excess force to the cover when opening it. Month and Day Setting Screen Alarm Off Alarm On Time Setting Screen Snooze on indicator DATE (month - date) Day of the week Alarm time PM indicator Current time (Hour, minutes, seconds) Alarm on indicator 1 USER'S GUIDE QW-2973 2. While the screen you want is on the display, use the Alarm Time Set buttons (2) to change the digits that are 2 flashing. · The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNZ. · The backlight also turns on for the first four seconds that the alarm sounds. · The alarm sound changes over five levels as it sounds. Stopping the Alarm · When alarm is sounding, press the Snooze/Light button (1) to stop it. When the snooze feature is turned on, 1 the alarm will sound again in about five minutes. 4 4 USING THE ALARM The alarm sounds and the backlight turns on when the alarm time you set is reached. You can also use the Alarm Switch (5) to select the snooze alarm feature. 5 Battery precautions Be sure to load the batteries with their positive (+) and negative (­) ends facing correctly. Replace the batteries at least once a year, even if the current batteries are working properly. Never charge the batteries that come with the clock. Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. · The batteries that come with the clock lose some of their power during transport and storage. · Never mix old and new batteries, or batteries of different brands. [. . . ] · · · · Setting the Alarm Time Use the Alarm Time Set buttons (2) to set the alarm time. 2 Pressing an Alarm Time Set button (2) causes the alarm time to appear in place of the date on the display. 2 Alarm Time Press to change the alarm time setting (­). Press to change the alarm time setting (+). Alarm Time Set buttons · Holding down + or ­ changes the digits at high speed. Turning the Alarm On and Off Use the Alarm Switch (5) on the side of the clock to turn the alarm on and off, and to select the snooze feature. [. . . ]