User manual CASIO QW-314

[. . . ] After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen. · The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about five minutes without performing any operation. USING THE ALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (6) to select the snooze alarm feature. Setting the Alarm Time Use the + and ­ buttons (2 3) to set the alarm time. [. . . ] Pressing the + and ­ buttons (2 3) causes the alarm time to appear in place of the date on the display. · Holding down + or ­ changes the digits at high speed. CR2032 3V (­) Decrease (+) Increase Turning the Alarm On and Off Alarm Mode selector Use the Alarm Mode selector (6) to turn the alarm on and off, and to select the snooze feature. Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE button (7), the alarm sounds again five minutes later. · The indicator activated. CR2032 3V SNZ ( ) flashes on the display to indicate that the snooze feature is ON ( OFF ) The alarm sounds at the preset time for one minute. The alarm does not sound. · The alarm time appears in place of the date on the display whenever the Alarm Mode selector (6) is set to ON or SNZ. · The alarm sound changes over four levels as it sounds. Stopping the Alarm · When the alarm is sounding, press the SNOOZE button (7) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. · To turn off the snooze feature, slide the Alarm Mode selector (6) to OFF. ENGLISH · A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the clock. 5 SET button · Use this button when setting the current time. 6 Alarm Mode selector SNZ: Snooze alarm on ON: Alarm on OFF: Alarm off 7 SNOOZE button · Pressing this button while the alarm is sounding stops the alarm. 8 Battery holder (Back of clock) 9 Battery : Stand A Strap hole BATTERY REPLACEMENT Replace the battery whenever the display becomes dim and difficult to read. To replace the battery 1. Turn over the clock, pull out the battery holder and remove the old battery. Place a new battery onto the holder, making sure that its positive (+) side is facing upwards (towards the back of the clock). Loading the battery incorrectly can cause it to burst and damage the clock. Slide the battery holder back into the clock. Always be sure to press the RESET button (1) after replacing the battery. Battery precautions USING THE CLOCK 1. Press the SET button (5) to cycle through the setting screens as shown below. Normal Timekeeping Screen Year Setting Screen Month and Day Setting Screen · Keep batteries out of the reach of small children. [. . . ] Always be sure to press the RESET button (1) after replacing the battery. Battery precautions USING THE CLOCK 1. Press the SET button (5) to cycle through the setting screens as shown below. Normal Timekeeping Screen Year Setting Screen Month and Day Setting Screen · Keep batteries out of the reach of small children. If a battery is swallowed accidentally, contact your physician immediately. [. . . ]