User manual CASIO QW-354

[. . . ] 5 SET button Use this button when setting the current time. 6 RESET button Press this button to reset the clock after replacing its batteries. 7 SOUND Selector (DQ-745 only) Use this selector to select the alarm volume. [. . . ] · Buttons marked "INVALID" have no function. Press ­ to change the alarm time setting. Press + to change the alarm time setting. Press ­ to change the alarm time setting. Press + to change the alarm time setting. USING THE ALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to select the snooze alarm feature. Setting the Alarm Time Use the + and ­ buttons (3) to set the alarm time. Pressing the + and ­ buttons (3) causes the alarm time to appear in place of the date on the display. DQ-745 QW-354 ALARM SET · Holding down + or ­ changes the digits at high speed. Turning the Alarm On and Off Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze feature. Alarm Mode selector SNZ Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen. · The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. 2 Operation Guide DQ-745/QW-354 THERMOMETER FUNCTIONS · A built-in sensor measures temperature and shows the measured value on the display. · The temperature display shows "LO" for temperatures below ­50°C (­58°F) and "HI" for temperatures above 70°C (158°F). · Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such readings are actually outside the guaranteed temperature range of this clock. Switching between Celsius and Fahrenheit Celsius (°C) · Push the °C/°F button (4) to select either Celsius (°C) or Fahrenheit (°F). Fahrenheit (°F) °C/°F button (4) °C °F BATTERY REPLACEMENT Replace batteries whenever the display of the clock becomes dim and difficult to read. Open the battery compartment cover as shown in the illustration. Make sure that their positive (+) and negative (­) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. Be sure to press the RESET button (6) after replacing batteries. Replace the battery compartment cover. Battery precautions · Keep batteries out of the reach of small children. [. . . ] Replace the battery compartment cover. Battery precautions · Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician immediately. · Be sure to load the batteries with their positive (+) and negative (­) ends facing correctly. [. . . ]