User manual CASIO WK-3700 MIDI

[. . . ] MIDI Implementation for the CTK-900, WK-3200, and WK-3700 Important!· All mentions of "this Model" in this document refer to the CASIO CTK-900, WK-3200, and WK-3700. Contents Part I 1. 1 1. 2 1. 3 1. 4 1. 5 MIDI Message Overview Controller Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Sound Source Block. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Sound Source Common Sub-blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If no MIDI Message is received for a particular amount of time, voices being sounded by this Model's sound source are released, controller is reset, and Active Sensing mode is exited. Active Sensing 16 Format System Exclusive Message Message Format: F0H. . . . F7H This Model can send and receive Universal System Exclusive Messages, as well as System Exclusive Messages that have a format that is unique to this Model. 16. 1 Format Universal Realtime System Exclusive Message 7FH. . . . F7H Message Format: F0H 16. 1. 1 Format Master Volume Message Format: F0H 7FH 7FH 04H 01H llH mmH F7H ll: Value LSB (Note 1) mm: Value MSB (Note 1) Note 1: The setting value matches the value that is sent and received. Receive Receipt changes the Master Volume parameter. Note that the Master Volume parameter cannot be changed with an operation of this Model. 25 16. 1. 2 Format Master Balance Message Format: F0H 7FH 7FH 04H 02H llH mmH F7H ll: Value LSB (Note 1) mm: Value MSB (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "42. 6 Pan Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Receive Receipt changes the Master Pan parameter. Note that the Master Pan parameter cannot be changed with an operation of this Model. 16. 1. 3 Format Master Fine Tuning Message Format: F0H 7FH 7FH 04H 03H 00H mmH F7H mm: Value MSB(Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "42. 7 -99 to 0 to 99 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent when the Fine Tune parameter of Transpose/Function is changed. Receive Receipt changes the Fine Tune parameter. 16. 1. 4 Format Master Coarse Tuning Message Format: F0H 7FH 7FH 04H 04H llH mmH F7H ll: Value LSB (Note 1) mm: Value MSB (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "42. 4 -24 to 0 to 24 Setting Value Table" in "Part VIII Setting Values and Send/Receive Values". Send Sent when the Transpose parameter of Transpose/Function is changed. Receive Receipt changes the Transpose parameter. 26 16. 1. 5 Format Reverb Parameter Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H ppH vvH F7H pp: Parameter vv: Value Type Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H 00H vvH F7H vv: Value (Note 1) Note 1: For information about the relationship between setting values and send/receive values, see "42. 10 Reverb Type Setting Value Table" in "Part VIII Setting Values and Send/Receive Values. " Send Sent when the Reverb Type parameter of System Reverb is changed. Receive Receipt changes the Reverb Type parameter. Time Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H 01H vvH F7H vv: Value (Note 1) Note 1: The setting value matches the value that is sent and received. Send Sent when the Reverb Time parameter of System Reverb is changed. Receive Receipt changes the Reverb Time parameter. 16. 1. 6 Format Chorus Parameter Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H ppH vvH F7H pp: Parameter vv: Value Type Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 00H vvH F7H vv: Value (Note 1) 27 Note 1: For information about the relationship between setting values and send/receive values, see "42. 11 Chorus Type Setting Value Table" in "Part VIII Setting Values and Send/Receive Values. " Send Sent when the Chorus Type parameter of System Chorus is changed. Receive Receipt changes the System Chorus Type parameter. Rate Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 01H vvH F7H vv: Value (Note 1) Note 1: The setting value matches the value that is sent and received. Send Sent when the Chorus Rate parameter of System Chorus is changed. Receive Receipt changes the Chorus Rate parameter of System Chorus. Depth Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 02H vvH F7H vv: Value (Note 1) Note 1: The setting value matches the value that is sent and received. Send Sent when the Chorus Depth parameter of System Chorus is changed. Receive Receipt changes the Chorus Depth parameter of System Chorus. Feedback Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 03H vvH F7H vv: Value (Note 1) Note 1: The setting value is the same as the value that is sent. Receive Receipt changes the Chorus Feedback parameter. The Chorus Feedback parameter cannot be changed with an operation of this Model. 28 Send To Reverb Format Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 04H vvH F7H vv: Value (Note 1) Note 1: The setting value is the same as the value that is sent. Receive Receipt changes the Chorus Send To Reverb parameter. The Chorus Send to Reverb parameter cannot be changed with an operation of this Model. 16. 1. 7 GM System Message GM System On Format Message Format: F0H 7EH 7FH 09H 01H F7H Send This message is never sent. [. . . ] The 4 Mbytes of flash memory of this Model is made up of two blocks, so two Parameter Sets are used. System Exclusive Format Field 01 02 03 04 05 06 07 08 09 10 11 12 13 SYSEX MAN MOD dev act cat prm ps index data sum EOX Value F0 44 11, 02 00 to 1F, or 7F 04(HDS), 05(HDR), 07(Control) Flash Memory Image = 11 00 Indicates the Flash Image Block Number being transferred. For details, see "39 About Parameter Set (PS) numbers". See "IV This Model's System Exclusive Message". [. . . ]