User manual CASIO XJ-S43W

[. . . ] English User's Guide (Basic Operations) · Be sure to read the "Safety Precautions" on page E-2 and "Operating Precautions" on page E-6 before trying to use this projector. · This manual covers only basic operations, including how to set up the projector, how to connect a computer or video device to the projector, and basic projector operations. For more detailed information, see the User's Guide (UsersGuide_English. pdf) on the CD-ROM that comes with the projector. Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2 Operating Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-6 Lamp Handling Precautions . . . . . . . . . . . . . . . . . . . . . . E-6 Lamp Replacement Precautions . . . . . . . . . . . . . . . [. . . ] For details, see the User's Guide on the CD-ROM that comes with the projector. E-12 Getting Ready Setup Precautions Note that the condition of the environment where you use the projector greatly affects its performance. Make sure that the following are the conditions of projector setup whenever you use it. Use a conveniently located power outlet that you can reach easily when you need to unplug the projector. Do not place any objects within the area indicated by the dashed line in the illustration below. Be especially careful that you never block intake and exhaust vents. Allow sufficient clearance and do not block intake and exhaust vents. Intake vents Exhaust vents 30 cm (11. 8 inches) Intake vents Do not locate any objects near the projector while it is in use. Keep all items at least 30cm (11. 8 inches) away from the intake and exhaust vents. The vents become quite hot while the projector is in use. Also, the areas near the exhaust vents become quite hot. Never locate objects made of plastic or other heat-sensitive materials near or under the projector. Doing so creates the risk of deformation and discoloration of the object. Avoid placing the projector on a surface that is unstable or prone to vibration. Never place the projector on top of a carpet, blanket, towel, or other soft material. Do not locate the projector where it will be exposed to direct sunlight. Avoid locations where there are large amounts of dust and moisture. Keep the projector away from speakers, TVs, radios, and other devices that generate magnetism, as well as from heaters. Over time, use of the projector can cause dust and dirt to build up in and around the fan's intake vents, which can lead to malfunction of the projector. Be sure to check the intake vents for dust build up each time before you use the projector. If you see dirt or dust in or around the intake vents, remove it by wiping with a cloth, etc. When positioning the projector, make sure you do so in such a way that the intake vents do not become blocked. Blocked intake vents can shorten the life of the lamp. Airflow from air conditioning equipment can blow the heat being exhausted from the area around the projector's lens in a way that causes heat ripples to appear in the projected image. [. . . ] If the input source is a video camera or document camera, check to make sure there is no problem with the input source. The message "Input the password. " appears and further operation is not possible. The "Option Settings 1 Power On Password" setting on the setup menu is turned on, so the projector is password protected. Input the correct password, and then press the [ENTER] key. [. . . ]