User manual CAT EYE CS-1000 (CYCLO SIMULATOR)

[. . . ] Package Contents 1 Bracket 2 Wire 3 Sensor 4 Magnet 5 Nylon Ties 7 U. S. Pending Copyright© 2003 CAT EYE Co. , Ltd. CCVL5/8-031030 066600280 1 VELO 5 CATEYE VELO 5 VELO 8 CATEYE VELO 8 SET (on Back) F G IMPORTANT!Correct positions of the sensor and the magnet: A When rotating the front wheel, the magnet's 4 center must be aligned with the sensor's 3 marking line. [. . . ] Correct positions of the sensor and the magnet: A When rotating the front wheel, the magnet's 4 center must be aligned with the sensor's 3 marking line. B The distance between the sensor 3 and the magnet 4 must be less than 5mm. Name of Parts Speed 0. 0 (4. 0) to 299. 9 km/h [0. 0 (3. 0) to 185. 0 mph] Mode Symbol Indicates the mode currently selected. (The corresponding value is indicated on the lower line. ) Pace Arrow* Indicates if the current speed is faster or slower than the average speed. ( Faster Slower) Speed Scale Sub Display (selected function) Battery Case Cover Contact *The Pace Arrow feature is only available on the VELO8. Pace Arrows are not displayed on the VELO5. Display function · Tm* · Dst · Av* · Mx · Cal* · Odo · [Elapsed Time] [Trip Distance] [Average Speed] [Maximum Speed] [Calorie Consumption] [Total Distance] [Clock] 0:00'00" to 9:59'59" 0. 00 to 999. 99 km [mile] 0. 0 to 299. 9 km/h [ 0. 0 to 185. 0 mph] (Measurable up to 27 hrs or 999. 99 km/h) 0. 0 (4. 0) to 299. 9 km/h [0. 0(3. 0) to 185. 0 mph] 0. 0 to 9999. 9 kcal (estimated from speed data) 0. 0 to 9999. 9 km [mile] 0:00' to 23:59'[1:00'to 12:59'] MODE INSTALLING THE UNIT 6 A 3 B 6 3 * This feature is only available on the VELO8. Start/Stop of Measuring The unit starts measuring automatically when you start pedaling, and stops measuring when your come to a stop. The upper display always shows the Current Speed. Shift of Lower Display Each time you press the MODE button, a different data value appears on the lower line. Even if the outside of the cord looks normal, there could be damage. Replace the bracket and sensor set with a new one. Is there anything sticking on the contact of the main unit or the bracket?Current speed disappears when using in the rain. Wipe any water or dirt from the contacts and apply a water repellent silicon grease. Do not apply standard grease, as it may cause damage to the bracket. 2 3 4 5mm 1 3 5 2 4 3 Replacing Battery If the screen becomes dim, it is the time to replace the battery. g *Insert a new lithium battery (CR2032) with the (+) mark facing up. 1 After replacing the battery, perform the all-clear operation. Follow SETTING to select the measurement unit & tire size and set the clock display to the current time. Specification Battery ---------------------- Lithium Battery CR2032 x 1(battery life: approx. [. . . ] 1 After replacing the battery, perform the all-clear operation. Follow SETTING to select the measurement unit & tire size and set the clock display to the current time. Specification Battery ---------------------- Lithium Battery CR2032 x 1(battery life: approx. 3 years) (*The life of the factory-loaded battery might be shorter than this. ) Microcomputer ------------- 4-bit 1-chip (Crystal controlled oscillator) Display ---------------------- Liquid crystal display Sensor ---------------------- No-contact magnetic sensor Tire Sizes ------------------- Tire sizes of 16, 18, 20, 22, 24, 26, 700C, and 27 inches, or tire peripheral lengths from 100 to 299 cm (Initial value: 26 in. ) Working Temperature ------ 0°C - 40°C Length of Wire ------------- 70cm Dimension/Weight --------- 1-7/8" x 1-25/32" x 23/32" (48 x 45 x 18 mm) / 1. 06 oz ( 30 g) *The specifications and design are subject to change without notice. 3 4 5 1 Calorie Consumption *1(VELO8) The calorie consumption data is only the accumulated value that is calculated from the speed data of every second. [. . . ]