User manual CAT EYE OS 1.0

[. . . ] U0 ID E p n a l c y c l o c o m p u e r s o t e r E ® Introduction Thank you very much for purchasing the CAT EYE OS 1. 0. Read "SETUP GUIDE" first, for the installation and the basic operation of the product. Read this "REFERENCE GUIDE" when you want to know more about the CAT EYE OS 1. 0. Important Warning!· Do not give excessive attention to the monitor or the data. [. . . ] Format operation (1. Before first use; 2. When erasing all the stored data) Caution: Take note that all the data is erased by this operation. If you want to stop format operation, select "NO" and the unit returns to measuring screen. This operation erases all the data and settings. Hold down both MODE/SELECT buttons simultaneously, press and release RESTART button. The message "FORMAT?" appears. Select "YES" and press ENTER/START/STOP button. Once format operation is done, the unit need to be set up from the first step. Setup In addition to Quick Setup that is written in the Setup guide, there is Custom Setup (see the next page). In the Custom Setup, you can select only your favorite functions that you want to use, and you can also choose your preferred font size and input your personal data. Note: By pressing the two SELECT/ MODE buttons simultaneously you can go back to the next previous screen. Goes to previous screen Speed scale setting Tire size setting Date setting Time scale setting Clock time setting Custom setup entrance NO Setup finished Setup process Function customizing Font size setting Personal data input YES Setup finished QUICK SETUP CUSTOM SETUP 6 OS 1. 0 Custom setup To personalize your Cat Eye OS1. 0, select YES in e Custom setup prompt. Function customizing You can choose to display just the functions you would like. Press ENTER/START/STOP button to select each function you would like to display. You can also simply SELECT ALL to display all seven cyclocomputer functions. you can choose any of the following 6 functions (current speed is always displayed): Elapsed Time, Trip Distance, Average Speed, Maximum Speed, Total Distance and Clock. To complete function customization navigate to "FINISHED" and press ENTER/START/STOP button. (Refer to page12. ) Font size Choose a display percentage font size. 70:30(%) 50:50(%) 30:70(%) 100(%) Personal data input Input your name. (Refer to page 12. ) Input your birthday by month and day (mm/ dd). Setup finished Setup finished You can change the settings later in the MENU screen. Menu Screen When MENU button is pressed, the screen changes from measuring screens to menu screens. Measuring screen Menu screens are divided into two categories: "Data Review" reviews the previous recorded data; "Function Setting" allows you to change various settings. Note: In the Menu Screen, battery runs down faster than the normal measuring screen. MENU Data review Refer to page 9 Last ride day data Maximum speed ever recorded Yearly distance Counterclockwise REV (SELECT) Weekly distance FWD Clockwise (SELECT) Monthly distance ENTER (START/STOP) FWD (SELECT) REV (SELECT) Function setting Refer to page 10-12 Tire size setting Date setting Function customizing Display contrast setting Personal distance REV (SELECT) Counterclockwise Auto mode on/off Clock time setting Font size setting FWD (SELECT) Clockwise Personal data input ENTER (START/STOP) Mode navigation on/off 8 OS 1. 0 Data review Checks and reviews the accumulated data of the past. Press MENU button again to return to measuring screen. Last ride day data ENTER Shows all the data measured in the last ride day (0:00 (START/STOP) 23:59 or midnight to midnight). [. . . ] Measurement does not stop even though START/STOP button is pressed. When the Auto Mode is on, START/STOP button does not start or stop measurement. (Refer to "Auto mode" in page 11. ) The size of the figures on the screen is reduced. When the bigger font size is selected (100%, 70%, 50%), and if the number of digits for trip distance and total distance exceed the maximum number of digits, the size is automatically reduced to fit on the screen. [. . . ]