User manual CATERPILLAR AP600D BROCHURE

[. . . ] Augers fumes extraction efficiently keeps asphalt fumes away from screed crew and operator. 4 Screed The AP600D is available with the AS4251C double width hydraulic power extendible asphalt screed, available with variable frequency tamper and vibrators and with LPG or electric heating system. The AS4251C lays material to the desired width and depth while providing a smooth finish with initial compaction. 8 Caterpillar® Asphalt Pavers continue to lead the industry and meet your demanding job requirements. Many easy-to-use features and technologies have been developed in order to guide your crew in producing high quality mats time and time again. [. . . ] The optional folding canopy provides full width with two side extending wings for optimum comfort and protection. The canopy can be lowered manually for easy transportation. Advisor Monitoring System Simplifies Operation The sliding control console includes the Advisor Display that provides many unique features to assist the operator. Advisor Monitoring System (AMS). The LCD Advisor provides access to a start-up checklist, operator preferences, engine and machine operating parameters and "Paving Calculator". The AMS display also allows the operator to: Calibrate the machine components Set the automatic engine speed control Monitor engine rpm's and operating temperatures Determine the required paving speed and tonnage requirements for a particular job Determine performance parameters such as distance traveled, operating hours, paving distance, paving hours, and engine fuel consumption Advisor Display 5 Wheel Undercarriage System The wheel undercarriage system provides excellent mobility and maneuverability along with a smooth ride for optimum performance. Excellent Mobility. The sharp turning radius and high propel speeds allow the paver to move quickly around the job site. 1 Three Propel Modes. Pave, travel and maneuver modes provide good control and versatility. The new maneuver mode provides a 1. 4 m turning radius for excellent maneuverability in tight quarters. A speed control dial located on the operating control console allows the operator to set a maximum propel speed. When the propel lever is moved to the full forward position, the paver returns to the preset speed. A position sensor located in the left steering cylinder provides good maneuverability by adjusting the drive speed of the propel motors according to the steering angle of the front wheels. This feature allows the machine to turn while maintaining a consistent travel speed, leading to better mat quality and less wear on the drive system. The 16. 00 x 25 radial tyres provide good tractive effort and a smooth ride. The 559 mm x 330 mm, solid rubber steering tyres provide maximum ground contact, leading to good turning capability. Four, front solid rubber steering wheels are mounted on pairs of oscillating bogies, providing a smooth ride. The long wheel base provides good tractive effort and stability on soft base materials. The front wheel assist feature provides power to the front bogie wheels for additional tractive effort. The all-wheel assist feature provides power to the front and rear bogie wheels, maximizing tractive effort. 1 Steering Assist Sensor 2 Front Wheel Assist and All-Wheel Assist (Options) 2 Turning radius of 1. 4 m 6 Independent Material Handling System Promotes Hands-Free Operation The material handling system promotes hands-free operation by providing features such as independent control of each auger and each conveyor. Precise Mix Delivery. The material delivery system provides precise mix delivery with minimal operator monitoring. The left and right conveyors in addition to the left and right augers are controlled independently. The conveyors have outboard-mounted motors, reducers and drive chains that maximize the tunnel area and reduce segregation. 1 3 2 4 Independent Auger Drive. The auger drive assembly is independent of the tractor, which allows the distance between the two conveyors to be significantly reduced. [. . . ] Derating is not required up to an altitude of 3000 m. Suspension Four front steering bogie wheels, two per side, are mounted in tandem on bogie axles, equalizing ground pressure. Drive Tyres (radial) two, 16. 00 x 25 Steering Wheels (solid rubber) four, 559 mm x 330 mm Wheel base 2360 mm Brakes Primary Brake Features A closed-loop hydrostatic system provides dynamic braking during normal operation. Parking Brake Features Safety and parking brakes system includes a spring applied, hydraulically released brake which is actuated by a switch on the operator's station control console. Electrical System The 24-volt DC electrical system is designed for improved durability, reliability and ease of service. Two 12-volt batteries with 1400 cranking amps each and a 80-amp alternator are used in the system. [. . . ]