User manual CATERPILLAR CB-534D BROCHURE

[. . . ] Page 5 Performance and Reliability You Can Depend On. Based upon the industry-proven reputation of the Caterpillar® Asphalt Compactors, the CB-500 D-Series Asphalt Compactors establish innovative new standards for productivity and reliability in the asphalt compaction industry. Durable Cat® powertrain, field-proven hydraulic systems, vibratory systems, and the world's largest and most dedicated dealer support system ensure the CB-500 D-Series Asphalt Compactors will provide maximum productivity. 2 Operator's Station The operator's station features comfort and visibility. A tilting steering column, propel lever wrist rest, and conveniently located and grouped control switches and gauges enhance operator productivity and reduce fatigue. Heavy-duty isolation mounts provide a smooth ride. [. . . ] Automatic Vibration Control The vibratory system automatically starts when the propel lever is moved from neutral and stops when positioned in neutral. q 1 2 3 4 5 6 7 8 Oil Level Sight Gauge Amplitude Selection Wheel Oil Drain Eccentric Weight Shaft Bearings Eccentric Weight 2-Position Counterweight Weight Drive Shaft to Motor Eccentric Weight Housing 4 CB-564D The CB-564D offers a wider drum and the Versa VibeTM vibratory system for increased production and versatility. Wider Drum Width The CB-564D incorporates a drum width of 2. 13 m (84") and a drum diameter of 1300 mm (51") providing increased lane coverage resulting in fewer passes. Operating Weight The operating weight of the CB-564D is 12 600 kg (27, 783 lb) providing a high centrifugal force of 112. 6 kN (25, 305 lb) Versa VibeTM Vibratory System The CB-564D is equipped with the Versa Vibe vibratory system which includes two frequencies of 63 Hz (3, 800 vpm) and 42 Hz (2, 520 vpm). The Versa Vibe system provides high frequency for thin lifts or high amplitude for demanding Superpave mixes. Caterpillar 3054C Diesel Engine High-tech four-cylinder engine provides outstanding performance and reliability. Power Draw Comparison 100 90 80 % Max Power 70 60 50 40 30 20 10 0 Time With POR Valve ­ CB-534D Without POR Valve ­ Competition Power Saved With POR Valve Cat® 3054C Engine The 3054C engine produces 97 kW (130 hp) of power at 2, 200 rpm providing fuel efficiency. Turbocharged for Top Performance The turbocharged engine provides efficient operation especially at high altitudes, up to 2500 meters (8, 200 feet) without derating. Balanced Power The Pressure Override (POR) valve balances power demand in order to provide responsiveness. 5 Operator's Station Ergonomically designed for maximum operator productivity and unmatched comfort. Comfortable Operating Environment The console and instrumentation move with the operator, staying in the same relative position to the operator. Multi-Position Operator's Station The operating station has nine rotating and seven sliding positions, maximizing comfort. Multi-Function Propel Handle The multifunction propel handle simplifies operation with the following controls: propel speed, vibe on/off, water spray on/off, horn and optional drum offset. Steering Console The entire console tilts for simple entrance and exit. A lockable vandal cover is provided for the console. For FOPS protection to be effective, the operator must be seated under the canopy. Automatic Speed Control Dial Comfortable and Durable Seat The seat has adjustable fore/aft position, suspension stiffness, and flip-up arm rests with a 76 mm (3") wide retractable seat belt. Isolated Operator's Station The operator's station with four, heavy-duty rubber mounts reduce machine vibration to the operator. Automatic Speed Control A speed control dial located on the operator's console simplifies operation by allowing the operator to preset the machine speed or impact spacing. The speed control dial allows the operator to push the propel lever to the forward or reverse positions while repeating the desired speed or impact spacing. 6 Water Spray System Corrosion-proof system and long-life components for reliable operation. High-Capacity Water Tank The single, high capacity, polyethylene water tank is enclosed within the machine frame providing extended operation. Two Pump System An auto pump control setting selects water from one pump while traveling forward and water from the other pump while traveling rearward. The system maintains even pump usage for uniform life. Triple Water Filtration Water filtration reduces machine downtime caused by system clogs. A mesh strainer is located in the water fill port. The water pump and spray nozzles, include screen filters that provide simple access and cleaning. Nozzle Orientation The upward spray nozzle orientation allows water to drain back into the supply line, limiting particle accumulation in the nozzle filter. Constant or Intermittent Spray Capability The water spray system provides constant or intermittent spray settings. The intermittent spray setting provides longer operation between fill-ups. The intermittent spray is infinitely variable allowing fine-tuning for any condition. On/Off Spray Control The spray control is located on the propel lever providing simple operation. Quick Release Spray Bars Covers Quick release spray bar covers shield the spray bars and nozzles from wind and sun, allowing the spray nozzles to provide consistent coverage across the drum surface. Freeze Protection Kit (Optional) The freeze protection kit includes an in-line antifreeze bottle that allows the operator to pump antifreeze into the system. [. . . ] Speeds (forward and reverse): 0-7. 3 km/h 0-4. 5 mph Low 0-8 mph 0-13 km/h High Frame Fabricated from heavy gauge steel plate and rolled sections. The frame is joined at the articulation pivot. 50% of the machine is rear of the articulation pivot and 50% is in front of the pivot. The two sections are joined by two hardened steel pins that are supported by heavy-duty roller bearings. [. . . ]