User manual CATERPILLAR CL210 BROCHURE

[. . . ] The drink holder accommodates large mugs with handles, and a shelf behind the seat stores large lunch or toolboxes. Automatic Climate Control The climate control system features ve air outlets with positive ltered ventilation, which makes working in the heat and cold much more pleasant. 4 Hydraulics Hydraulic Horsepower Power to move more dirt, rock, and debris with speed and precision Hydraulic horsepower is the actual machine power available to do work through implements and work tools. It's much more than just the engine power under the hood ­ it's a core strength that differentiates Cat machines from other brands. Main Control Valve and Auxiliary Valves The CL210 uses a high-pressure system to tackle the toughest of work in short order. The machine features a highly ef cient and simple main control valve to improve fuel consumption; it also allows for greater tool versatility. Electric Boom Regeneration System The CL210 regenerates the ow of oil from the head end of the boom cylinder to the rod end of the boom cylinder during a boom down operation to save energy, which helps improve fuel ef ciency. It is optimized for any dial speed setting being used by the operator, which results in less pressure loss for higher controllability, more productivity, and lower operating costs. 5 Structures & Undercarriage Built to work in rugged environments Frame The upper frame includes reinforced mountings to support the Roll-Over Protective Structure (ROPS) cab; the lower frame is reinforced to increase component durability. Undercarriage Long undercarriage supports various work applications. [. . . ] A highly visible lock clearly shows the operator when the coupler is engaged or disengaged from the bucket or work tool. Buckets Cat buckets are designed as an integral part of the CL210 system and feature new geometry for better performance. The leading edge has been pushed forward, resulting in more ef cient lling and better operator control for greatly improved productivity. Wear coverage in the corners and side cutter and sidebar protector coverage are improved. All bene ts are captured in a new bucket line with a new bucket naming convention. 8 Durability Categories Suitable for Any Situation Caterpillar offers standard bucket categories for excavators. Each category is based on intended bucket durability when used in recommended applications and materials. Each bucket durability is available as pin-on or can be used with a quick coupler. General Duty (GD) GD buckets are for digging in low-impact, low-abrasion material such as dirt, loam, and mixed compositions of dirt and ne gravel. 1 2 Severe Duty (SD) SD buckets are for higher abrasion conditions such as well shot granite and caliche. Red area on bucket image illustrates additional protection against wear as compared to a GD bucket. 1) General Duty 2) Severe Duty Specialty Buckets In addition to the standard four bucket categories, specialty bucket styles are available for the CL210, each with a different purpose: · · Ditch Cleaning buckets for cleaning ditches, slope grading, and other nish work. Center-Lock Pin Grabber Performance buckets for maximum digging performance while keeping the versatility and convenience of a coupler. Wide Tip buckets for low impact material where leaving a smoother oor and minimal spillage are necessary. · Hydraulic Kits Caterpillar offers eld-installed hydraulic kits that are uniquely designed to integrate Cat Work Tool attachments with Cat excavators. Hoses and tubes are pre-made, pre-shaped, and pre-painted to make installation quick and easy. Comprehensive Product Support All Cat Work Tools are backed up by a world-wide network of well-stocked parts depots and highly experienced service and support personnel. 9 1 Integrated Technologies Cat® Grade Control Depth and Slope This optional system combines traditional machine control and guidance with standard factory-installed and calibrated components, making the system ready to go to work the moment it leaves the factory. Kg and lb were rounded up separately so some of the kg and lb do not match. Base machine includes 75 kg (165 lb) operator weight, 90% fuel weight, and undercarriage with center guard. 18 Bucket and Stick Forces Reach Booms 5. 1 m (16'9") Stick R3. 1 (10'2") kN (lbf) General Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (SAE) Stick Digging Force (SAE) Severe Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) Bucket Digging Force (SAE) Stick Digging Force (SAE) 111 (25, 000) 71 (16, 000) 98 (22, 000) 69 (15, 500) 111 (25, 000) 71 (16, 000) 96 (21, 600) 69 (15, 500) R2. 9 (9'6") kN (lbf) 111 (25, 000) 75 (16, 900) 98 (22, 000) 73 (16, 400) 111 (25, 000) 75 (16, 900) 96 (21, 600) 72 (16, 200) R2. 6 (8'6") kN (lbf) 111 (25, 000) 80 (18, 000) 98 (22, 000) 77 (17, 300) 111 (25, 000) 80 (18, 000) 96 (21, 600) 77 (17, 300) 19 CL210 Hydraulic Excavator Speci cations Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 5. 1 m (16'9") Stick ­ R3. 1 (10'2") 1. 5 m/5. 0 ft 3. 0 m/10. 0 ft Counterweight ­ 2. 8 mt (3. 1 t) Shoes ­ 700 mm (28") triple grouser 4. 5 m/15. 0 ft 6. 0 m/20. 0 ft 7. 5 m/25. 0 ft Bucket ­ None m ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line ­1. 5 m ­5. 0 ft ­3. 0 m ­10. 0 ft ­4. 5 m ­15. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb *2700 *6, 050 *2450 *5, 350 *2350 *5, 150 *2400 *5, 250 *2550 *5, 550 *2800 *6, 150 *3350 *7, 350 4300 9, 500 *5150 *11, 400 *2700 *6, 050 *2450 *5, 350 2300 5, 100 2050 4, 550 2000 4, 350 2000 4, 400 2150 4, 750 2600 5, 700 3750 8, 500 5. 49 17. 57 6. 76 21. 96 7. 52 24. 58 7. 93 25. 98 8. 03 26. 36 7. 85 25. 77 7. 36 24. 12 6. 49 21. 18 5. 04 16. 24 *5050 *11, 250 *8400 *18, 850 *5050 *11, 250 *8400 *18, 850 *7450 *15, 850 *7550 *18, 100 *6650 *15, 300 *9300 *21, 150 *11 350 *24, 500 *9000 *19, 200 *7450 *15, 850 *7550 17, 700 *6650 *15, 300 7700 16, 550 7800 16, 750 8050 17, 300 *5300 *11, 400 *6700 *14, 450 7500 16, 100 7350 15, 800 7350 15, 800 *6100 *12, 850 4950 10, 700 4600 9, 900 4350 9, 300 4200 9, 050 4200 9, 050 4350 9, 450 *3650 *7, 850 *3850 *8, 450 *4450 *9, 650 5000 10, 750 4850 10, 400 4750 10, 250 4800 10, 300 3450 7, 400 3400 7, 250 3250 6, 950 3050 6, 550 2900 6, 250 2850 6, 100 2850 6, 150 *2450 3650 *7, 500 3600 7, 700 3500 7, 550 2350 2300 4, 850 2200 4, 700 2150 4, 600 Boom ­ 5. 1 m (16'9") Stick ­ R2. 9 (9'6") 1. 5 m/5. 0 ft 3. 0 m/10. 0 ft Counterweight ­ 2. 8 mt (3. 1 t) Shoes ­ 700 mm (28") triple grouser 4. 5 m/15. 0 ft 6. 0 m/20. 0 ft 7. 5 m/25. 0 ft Bucket ­ None m ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line ­1. 5 m ­5. 0 ft ­3. 0 m ­10. 0 ft ­4. 5 m ­15. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb *2950 *6, 500 *2650 *5, 800 *2550 *5, 650 *2650 *5, 800 *2850 *6, 250 *3200 *7, 050 3800 8, 400 4650 10, 300 *5550 *12, 150 *2950 *6, 500 *2650 *5, 800 2500 5, 450 2200 4, 850 2100 4, 600 2100 4, 650 2300 5, 100 2800 6, 200 4300 9, 800 5. 08 16. 21 6. 43 20. 89 7. 23 23. 63 7. 66 25. 09 7. 77 25. 48 7. 58 24. 87 7. 07 23. 16 6. 16 20. 07 4. 60 14. 75 *5700 *12, 750 *9300 *20, 850 *5700 *12, 750 *9300 *20, 850 *8000 *17, 000 *7100 *17, 000 *7050 *16, 150 *10 100 *22, 900 *11 100 *23, 950 *8550 *18, 150 *8000 *17, 000 *7100 *17, 000 *7050 *16, 150 7750 16, 600 7850 16, 800 8100 17, 450 *5500 *11, 900 *6900 *14, 900 7500 16, 050 7350 15, 800 7400 15, 900 *5700 4950 10, 600 4550 9, 850 4300 9, 300 4200 9, 100 4250 9, 150 4450 *3650 *7, 350 *4050 *8, 850 *4600 *10, 000 5000 10, 750 4850 10, 450 4800 10, 300 4800 10, 350 3450 7, 350 3350 7, 250 3200 6, 900 3050 6, 550 2950 6, 300 2850 6, 150 2900 6, 250 *3300 *6, 050 3600 7, 700 3500 2300 4, 850 2200 4, 750 2150 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. 20 Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom ­ 5. 1 m (16'9") Stick ­ R2. 6 (8'6") 1. 5 m/5. 0 ft 3. 0 m/10. 0 ft Counterweight ­ 2. 8 mt (3. 1 t) Shoes ­ 700 mm (28") triple grouser 4. 5 m/15. 0 ft 6. 0 m/20. 0 ft 7. 5 m/25. 0 ft Bucket ­ None m ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line ­1. 5 m ­5. 0 ft ­3. 0 m ­10. 0 ft ­4. 5 m ­15. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb *7, 500 *4600 *10, 000 *5900 *12, 650 *7200 *15, 550 7500 16, 100 7450 15, 950 *7450 *16, 000 *7, 500 *4600 *10, 000 4900 10, 550 4550 9, 800 4350 9, 350 4300 9, 200 4350 9, 300 *3500 *6, 450 *4300 *9, 400 *4800 *10, 450 5000 10, 750 4900 10, 500 4800 10, 350 3400 *6, 450 3350 7, 200 3200 6, 900 3050 6, 600 2950 6, 350 2900 6, 250 *3250 *7, 300 *2850 *6, 350 *2750 *6, 100 *2800 *6, 200 *3000 *6, 600 *3400 *7, 450 4050 8, 850 5000 11, 150 *5400 *11, 900 *3250 *7, 300 *2850 *6, 350 2600 5, 750 2300 5, 100 2200 4, 800 2250 4, 900 2450 5, 400 3050 6, 750 4950 11, 350 4. 76 15. 09 6. 18 20. 05 7. 01 22. 89 7. 44 24. 39 7. 56 24. 80 7. 36 24. 16 6. 84 22. 40 5. 89 19. 19 4. 23 13. 51 *8850 *18, 850 *6250 *14, 400 *10 150 *23, 100 *10 750 *23, 200 *7750 *16, 300 *8850 *18, 850 *6250 *14, 400 7850 16, 850 8000 17, 100 *7750 *16, 300 *3400 2250 *5750 *12, 800 *9950 *22, 400 *5750 *12, 800 *9950 *22, 400 Boom ­ 5. 1 m (16'9") Stick ­ R3. 1 (10'2") 1. 5 m/5. 0 ft 3. 0 m/10. 0 ft Counterweight ­ 2. 8 mt (3. 1 t) Shoes ­ 600 mm (24") triple grouser 4. 5 m/15. 0 ft 6. 0 m/20. 0 ft 7. 5 m/25. 0 ft Bucket ­ None m ft 7. 5 m 25. 0 ft 6. 0 m 20. 0 ft 4. 5 m 15. 0 ft 3. 0 m 10. 0 ft 1. 5 m 5. 0 ft Ground Line ­1. 5 m ­5. 0 ft ­3. 0 m ­10. 0 ft ­4. 5 m ­15. 0 ft kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb *2700 *6, 050 *2450 *5, 350 *2350 *5, 150 *2400 *5, 250 *2550 *5, 550 *2800 *6, 150 *3350 *7, 350 4250 9, 350 *5150 *11, 400 *2700 *6, 050 *2450 *5, 350 2300 5, 050 2050 4, 500 1950 4, 250 1950 4, 300 2150 4, 700 2550 5, 650 3700 8, 400 5. 49 17. 57 6. 76 21. 96 7. 52 24. 58 7. 93 25. 98 8. 03 26. 36 7. 85 25. 77 7. 36 24. 12 6. 49 21. 18 5. 04 16. 24 *5050 *11, 250 *8400 *18, 850 *5050 *11, 250 *8400 *18, 850 *7450 *15, 850 *7550 *18, 100 *6650 *15, 300 *9300 *21, 150 *11 350 *24, 500 *9000 *19, 200 *7450 *15, 850 *7550 17, 500 *6650 *15, 300 7600 16, 300 7700 16, 500 7950 17, 100 *5300 *11, 400 *6700 *14, 450 7400 15, 850 7250 15, 550 7250 15, 600 *6100 *12, 850 4900 10, 550 4550 9, 750 4250 9, 200 4150 8, 950 4150 8, 950 4300 9, 300 *3650 *7, 850 *3850 *8, 450 *4450 *9, 650 4950 10, 600 4800 10, 250 4700 10, 100 4700 10, 150 3400 7, 300 3350 7, 150 3200 6, 850 3000 6, 500 2900 6, 200 2800 6, 000 2800 6, 050 *2450 3600 *7, 500 3550 7, 550 3450 7, 450 2300 2250 4, 800 2150 4, 650 2100 4, 500 *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. [. . . ] Consult your Cat dealer for proper match. *Matches are dependent on excavator configurations. Consult your Cat dealer for proper work tool match. 23 CL210 Hydraulic Excavator Speci cations Bucket Specifications and Compatibility Width Capacity Weight Fill R2. 6 (8'6") Reach Booms R2. 9 (9'6") R3. 1 (10'2") R3. 1 (10'2") Thumb* mm Without Quick Coupler General Duty (GD) 600 750 900 1050 1200 Severe Duty (SD) 600 750 900 1050 1200 in 24 30 36 42 48 24 30 36 42 48 m3 0. 35 0. 49 0. 62 0. 76 0. 91 0. 35 0. 49 0. 62 0. 76 0. 91 yd3 0. 46 0. 64 0. 81 1. 00 1. 19 0. 46 0. 64 0. 81 1. 00 1. 19 kg 445 502 548 595 672 496 564 644 689 762 lb 980 1, 106 1, 208 1, 312 1, 480 1, 093 1, 243 1, 420 1, 519 1, 678 % 100% 100% 100% 100% 100% 90% 90% 90% 90% 90% kg lb X X X 2205 4, 860 2095 4, 617 X 1945 4, 287 1875 4, 133 Maximum load pin-on (payload + bucket) With Center Lock Quick Coupler General Duty (GD) 600 750 900 1050 1200 Severe Duty (SD) 600 750 900 1050 1200 24 30 36 42 48 24 30 36 42 48 0. 35 0. 49 0. 62 0. 76 0. 91 0. 35 0. 49 0. 62 0. 76 0. 91 0. 46 0. 64 0. 81 1. 00 1. 19 0. 46 0. 64 0. 81 1. 00 1. 19 445 502 548 595 672 496 564 644 689 762 980 1, 106 1, 208 1, 312 1, 480 1, 093 1, 243 1, 420 1, 519 1, 678 100% 100% 100% 100% 100% 90% 90% 90% 90% 90% kg lb 1815 4, 000 1705 3, 758 1555 3, 427 1485 3, 273 Maximum load with coupler (payload + bucket) Maximum Material Density: The above loads are in compliance with hydraulic excavator standard EN474, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled. * Densities with 3. 1 m (10'2") thumb stick does not consider thumb weight. X 2100 kg/m3 (3, 500 lb/yd3) 1800 kg/m3 (3, 000 lb/yd3) 1500 kg/m3 (2, 500 lb/yd3) 1200 kg/m3 (2, 000 lb/yd3) 900 kg/m3 (1, 500 lb/yd3) Not recommended Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. [. . . ]