User manual CATERPILLAR D10T WH BROCHURE

[. . . ] 8 designed track shoes and hydraulic rippers. 10 New Feature 3 Waste Handling Guards Extensive guarding helps protect critical machine components, body panels and the radiator from being damaged by debris under harsh waste handling environments. Minimizing build-up helps prevent component damage. Radiator Guard. The heavy-duty hinged radiator guard protects the cooling system. Crankcase (belly) Guards. [. . . ] Intake air is spun by a flow driven impeller. Debris stratifies along the outer wall and is ejected back into the environment. Remaining contaminates are collected and removed by a secondary scavenger system, allowing only precleaned air to continue to the engine's air filter. 7 Required Attachments These options must be ordered in addition to the basic Waste Handling Arrangement. Enhanced Cab. The enhanced cab provides higher cab pressurization for improved cab air quality in dust and debris-laden applications. Includes a powered precleaner, with a high efficiency filter, which reduces system maintenance intervals. Hydraulic and Fuel Tank guard. The hydraulic and fuel guard helps protect implement hydraulic oil tank, battery box and fuel tank. Supplemental Cylinder Mounted Lights. The supplemental cylinder mounted lights (four front) are repositioned from the fender/ openings to the top of the cylinders. The fender openings are covered with plates to prevent debris from entering. Chose from either Halogen or HID (high intensity discharge). Engine Enclosures. The engine enclosures consist of perforated hood and side panels. The enclosures help prevent airborne materials from entering the engine compartment and help reduce radiator plugging, which can cause cooling system problems. Note: If the sound suppression arrangement is ordered, the perforated side panels are replaced with solid doors and the perforated hood is replaced with larger rectangular perforations. Rear Striker Bars. The rear striker bars incorporate a rigid drawbar and housing with large access doors for storage on machines not equipped with rippers. The rear striker bars are counterweightready in case additional rear weight is needed. For machines with rippers, striker bars mount on ripper frame. Note: The D10T uses rear counterweights instead of a housing with doors. 8 ROPS-mounted Air Conditioner Condenser and Fans. The ROPSmounted air conditioner and fans are relocated from the engine compartment to the ROPS. · Moving the condenser and fans away from the radiator reduces the concentration of debris and plugging. This relocation also increases the cooling capacity of the machine for operation in higher temperatures. Laminated Thermal Shields. The laminated thermal shields cover the exhaust stack inside the compartment, hot-side of the turbocharger, and the exhaust manifold. These shields reduce surface temperatures well below the flash point of most common combustibles encountered. Note: The ROPS-mounted position raises the height of the machine an additional 30. 5 cm (12 in). 9 Recommended Options Features for peak performance. Several additional options are recommended to assist in matching your site requirements. Hydraulic Rippers. [. . . ] **** Engine model meets current levels of exhaust emission regulations for the EPA, EU, and JMOC at time of manufacture. **** Height without ROPS canopy, exhaust pipe, seat or all easily removed encumbrances. **** For all other models, refer to standard specalogs. Note: D8T configured with 8SU blade with 762 mm (30 in) track rack and 660 mm (26 in) track shoes. [. . . ]