User manual CATERPILLAR PS-360C BROCHURE

[. . . ] The PS-360C will achieve outstanding compaction results regardless of the application with its proven suspension design and flexible weight adjustment. 2 Ballasting The ballast compartments are positioned with a calculated balance of wheel to weight ratio. Internal-frame baffles help prevent surges when water ballast is used. Page 5 Ground Contact Pressures Ground contact pressures are measured across the width of the tires. Changing the tire pressure or altering the ballast capacity will allow the PS-360C to meet specific job requirements. [. . . ] Integrated baffles prevent surges when water ballasted. R Large cover plates on the operator's platform provide fill points for sand or steel. The water fill port can be accessed from ground level. PS -36 0C Bolt-on side cover allows quick removal of sand or steel ballast. Water ballast can be emptied through a drain valve located on the chamber. 5 Serviceability Less time on maintenance means more time on the job. Routine maintenance points are grouped in the engine compartment. Ground level servicing simplifies maintenance. Visual restriction indicators for the hydraulic oil filter and air filter. Simplified access to the power-train through the engine hood. Color-coded and numbered wires wrapped in nylon braid ensure system integrity and help simplify troubleshooting. Grouped pressure taps with quick-connect fittings simplify troubleshooting. Remote lubrication fittings decrease maintenance time. Optional Equipment Standard and optional equipment may vary, contact your Caterpillar dealer for details. Sliding Operator's Station includes a multi-position control console that slides into three locked positions: left, center and right. The operator's seat also rotates 30º in either direction. Suspension Seat is a mechanical seat that has vertical height and weight adjustments with armrests. Speedometer is calibrated in kilometers per hour (km/h) and miles per hour (mph) on an analog dial. Roading Light Package includes taillights and parking lights with flashers. Tire Wetting System allows solvent to be sprayed on the tire surfaces. The system includes a 19 L (5 gal) emulsion tank, electric pump and spray nozzles for each tire. Sun Canopy includes a sheet-metal structure that shields the operator's station from the sun. Heat Retention Shields include a belttype material that traps heat in order to prevent asphalt from adhering to the tire surfaces. Combined Ballast consists of four internal ballast blocks weighing 4064 kg (8, 960 lb), two steel blocks weighing 446 kg (982 lb) that are bolted to the front bumper, and two sets of of 51 mm (2") thick steel ballast plates weighing 3084 kg (6, 600 lb). This option combined with wet sand ballast provides an operating weight of 25 022 kg (55, 115 lb). Spare Tire and Wheel includes a 14/70 x 20, 20-ply tire and rim. 6 Dimensions A B C D E Operating length Compaction width Frame width Wheel base Ground clearance 4. 87 m 2. 28 m 2. 15 m 3. 65 m 252 mm 16' 7' 6" 7' 1" 12' 10" Height at steering wheel F Height at ROPS G Turning radius (outside) Turning radius (inside) Tire overlap 2. 53 m 3. 20 m 6. 7 m 3. 47 m 58 mm 8' 4" 10' 6" 22' 11' 5" 2. 25" G R F B C R E D A Weights (approximate) Operating weight includes lubricants, coolant, 80 kg (175 lb) operator, full fuel tank, and full hydraulic system. Operating Weights Condition Total Weight Weight Per Wheel Shipping With maximum water ballast With maximum steel ballast With maximum wet sand ballast With water ballast and steel ballast With wet sand ballast and steel ballast 8 500 kg 13 500 kg 15 995 kg 18 500 kg 20 000 kg 25 000 kg 18, 740 lb 29, 760 lb 35, 265 lb 40, 785 lb 44, 090 lb 55, 115 lb 1215 kg 1930 kg 2285 kg 2645 kg 2855 kg 3570 kg 2, 675 lb 4, 250 lb 5, 040 lb 5, 830 lb 6, 300 lb 7, 870 lb PS-360C specifications 7 Engine Four-stroke cycle, four cylinder Cat 3054C ATAAC turbocharged diesel engine. EPA Tier 2 engine emission specifications. Ratings at Gross power RPM 2, 200 kW 98 hp 130 Transmission Two speed hydrostatic propel system. [. . . ] The side console includes the propel lever, speed selector switch, spray system controls, horn and secondary brake switch. 8 PS-360C specifications Ballast Considerations and Ground Contact Pressures The most common method of changing ground contact pressure is to vary the tire pressure. Another means to change ground contact pressure is to alter the ballast. The ballast compartments are positioned with a calculated balance of wheel to weight ratio. Internal-frame baffles help prevent surges when water ballasted. [. . . ]