User manual CATERPILLAR TL642 BROCHURE

[. . . ] Cat Specifications Engine Model Cat 3054C DIT Gross Power (Basic) 74 kW 99 hp Net Power (Basic) 70. 4 kW 94. 5 hp · Net Power shown is the power available at the flywheel when equipped with fan, air cleaner, muffler and alternator. ® ® TL642 Telehandler Boom Performance Boom Up Boom Down Tele In Tele Out Drawbar Pull (Loaded) 13 Seconds 10 Seconds 13 Seconds 14 Seconds 80. 07 kN 18, 000 lb Weights Operating Weight 9180 kg 20, 240 lb Axles · Trunnion mounted planetary 55 degree steer axles. [. . . ] The machine must be level on a firm surface with 10. 9 m (36 ft) undamaged, properly inflated tires. Machine 50° specifications and stability are based on rated 9. 7 at specific boom angles and lift capacitiesm (32 ft) boom lengths. (If specifications are 40° critical, the 8. 5 m (28 ft) proposed application should be discussed with your dealer. ) 7. 3 m (24 ft) DO NOT exceed rated lift capacity loads, as 30° unstable and dangerous machine conditions will result. 6. 1 m (20 ft) 40 50 60 70 80 60° 30° 1814 kg (4, 000 lb) 2722 kg (6, 000 lb) 1361 kg (3, 000 lb) 907 kg (2, 000 lb) 317 kg (700 lb) 3. 7 m (12 ft) 2. 4 m (8 ft) 1. 2 m (4 ft) 10° -10 10 40 20 30 TL642 0° 0 m (0 ft) -1. 2 m (-4 ft) Use only JLG approved attachments 3. 7 m (12 ft) with proper material handler model/ 10° attachment load capacity charts displayed 2. 4 m cab. in the operator's(8 ft) OSHA requires all rough terrain forklift operators be trained according to OSHA 29 CFR 1910. 178 (1). 1. 2 m (4 ft) 0° 0 m (0 ft) -9° -2. 4 m (-8 ft ) 9. 7 m 8. 5 m 7. 3 m 6. 1 m 4. 9 m 3. 7 m 2. 4 m 1. 2 m 0 m (32 ft) (28 ft) (24 ft) (20 ft) (16 ft) (12 ft) (8 ft) (4 ft) (0 ft) Due to continuous product improvements, machine specifications and/or equipment -1. 2 m made changes may be(-4 ft) without prior -9° notification. This machine meets or exceeds -2. 4 m (-8 ft ) ANSI/ITSDF B56. 6-2005 as originally 9. 7 m applications. [. . . ] the allowablem (16 ft) 1361 kg (3, 000 lb) 1814 kg (4, 000 lb) 102 0 30 TL64 2 [. . . ]