User manual CATERPILLAR TL943C BROCHURE

[. . . ] · High bias limited slip differential on front axle. Operating Specifications Rated Load Capacity Maximum Lift Height Maximum Forward Reach Frame Leveling Top Travel Speed Capacity at Max Height Capacity at Max Reach Turning Radius over Tires 4082 kg 13. 1 m 9. 6 m 10° 28. 3 kph 3175 kg 544 kg 3. 7 m 9, 000 lb 43 ft 31. 5 ft 17. 6 mph 7, 000 lb 1, 200 lb 12 ft Brakes · Service Brakes are inboard wet disc brakes on front and rear axles. [. . . ] Light on dash indicates when brake is on. Instruments · Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge. All gauges protected by clear acrylic cover. Hydraulic System -- Implement Gear Pump Tandem System Operating Pressure 276 bar 4, 000 psi Auxiliary Hydraulic Pressure 207 bar 3, 000 psi Auxiliary Hydraulic Flow 38 L/min 10 gal/min at Boom Head · Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls and hydraulic lines. Work Tools Hydraulic IT Coupler Pallet Forks Includes Auxiliary Electrics (2) 1524 mm, 51 mm x 152 mm (2) 1219 mm, 60 mm x 102 mm (2) 1219 mm, 51 mm x 51 mm 1270 mm 1829 mm 1270 mm Includes Auxiliary Electrics (2) 60 in, 2 in x 6 in (2) 48 in, 2. 36 in x 4 in (2) 48 in, 2 in x 2 in 50 in 72 in 50 in 72 in 100°, 72 in, 9, 000 lb Capacity, 5, 000 lb Swung 48 in Cubing Forks Standard Tilt Carriage Wide Tilt Carriage Standard Rotate Carriage Wide Rotate Carriage Swing Carriage Service Refill Capacities Fuel Tank Hydraulic System 144 L 151. 4 L 38 gal 40 gal Tires Standard Optional 13. 00 x 24-12 PR 13. 00 x 24 Foam Filled 13. 00 x 24 Rock Lug 13. 00 x 24 Solid Transmission Speeds Forward Reverse 4 speed 3 speed 1829 mm 100°, 1829 mm, 4028 kg Capacity, 2268 kg Swung Side Shift Carriage 1. 22 m TL943CC Telehandler Dimensions All dimensions are approximate. TL943CC 94 in. (2. 38 m) 2. 43 m (95. 5 in) 16. 4mm (19 in) 483 in. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY. CAT. COM, their respective logos, "Caterpillar Yellow" and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. 907 kg (2, 000 lb) AEHQ5840-05 (09-2010) 1360 kg (3, 000 lb) Use only JLG approved attachments with (12 ft) material handler model/ proper 3. 7 m attachment load capacity charts displayed 10° in the (8 ft) operator's cab. OSHA requires all 2. 4 m rough terrain forklift operators be trained according to OSHA 29 CFR 1910. 178 (1). 1814 kg (4, 000 lb) 4. 9 m (16 ft) 4. 9 m (16 ft) 2267 kg (5, 000 lb) 20° 80 3175 kg (7, 000 lb) 6. 1 DOm (20 ft) the machine forward to determine NOT tip the allowable load. [. . . ] OSHA requires all 2. 4 m rough terrain forklift operators be trained according to OSHA 29 CFR 1910. 178 (1). 1814 kg (4, 000 lb) 4. 9 m (16 ft) 4. 9 m (16 ft) 2267 kg (5, 000 lb) 20° 80 3175 kg (7, 000 lb) 6. 1 DOm (20 ft) the machine forward to determine NOT tip the allowable load. [. . . ]