User manual CAVAVIN CAVA28SM

[. . . ] It is intended to help you operate and maintain your new Wine Cellar properly. If you don't understand something or you need more assistance, please call: info@Cavavin. Com Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period. ____________________________________ Model Number Write down the model and serial numbers. [. . . ] Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord. Extension Cord Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes. It is recommended you install the Wine Cellar in a place where the ambient temperature is between 23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. You can select temperature display setting from Fahrenheit to Celsius degree by pushing this button. (Fahrenheit or Celsius indicator will appear in green color) The degrees will appear in blue color in the temperature display window. Your Wine Cellar has been equipped with an "automatic" control panel lock, that will activate 12 minutes after the last time a button has been touched Push the and button simultaneously for 3 seconds to unlock the control panel. You will or button on the control hear a "BEEP" sound to alert you that the control panel is now active. You can set the temperature as you desire by pushing the the The temperature that you desire to set will increase 1ºF or 1ºC if you push button once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the button once. After a power failure, control functions will be locked for up to 5 minutes. to reset , press the "ON" button and start operation as normal. After 5 minutes the unit will automatically turn on and revert to the factory default setting. When you store mostly red wines, the temperature needs to be set at between 14º - 18ºC (57º 65ºF). The indicator marked with the RED wine glass will light up in red. When you store mostly white wines, the temperature needs to be set at between 9º - 14ºC (49º 58ºF). The indicator marked with the WHITE wine glass will light up in blue. When you store mostly sparkling wines, the temperature needs to be set at between 5º - 9ºC (40º - 49ºF). [. . . ] Securely tape down all loose items (shelves) inside your appliance. Protect outside of appliance with a blanket, or similar item. Energy Saving Tips The Wine Cellar should be located in the coolest area of the room, away from heat producing appliances, and out of the direct sunlight. One characteristic of superconductor units is the length of time it requires to recover from having the door opened and shut frequently. [. . . ]