User manual CHAMBERLAIN TCTX2E

[. . . ] UP key master transmitter press in the hole near 1. In the receiver module you will hear a 1. If you want to arrange for an intermediate stop during the opening or closing process, press rapid sequence of signals. press the UP or DOWN key on the central transmitter. [. . . ] During this procedure the units should exchange it for a battery of type: 12V /23A (1x) The housing can be closed again by simply be no more than 5 metres apart. Pressing the cover and base elements together 2. First the memory of the receiver module must be cleared. Then the TCTX2E and TCRX3E alpha nea® or TCRX2E can be programmed to one another. You will hear a ETS 300 683, CE continuous tone. We reserve the right to make technical memory is now clear). If you are using the changes in the interest of progress. TCRX2E, press the up and down buttons at the same time until you hear a continuous signal (after approx. Chamberlain warrants to the first retail purchaser Press both knobs on the TCRX2E. A pulsating of this product that the product shall be free from signal will be heard. Period of 24 full months (2 years) from the date of The signal will stop. Upon receipt of the product, the first the Master transmitter on the receptor module. You can control one roller shutter with replacement of the parts of this product which are several TCTX2E wall switch units. Found to be defective and does not cover the costs 4. On the back of the first TCTX2E (Master) or risks of transportation of the defective parts or press a needle into the hole near Learn. This warranty does not cover non-defect receiver module a pulsating signal will be heard. Press the UP or DOWN key on the new TCTX2E. The roller shutters use not in complete accordance with can now also be operated with the new TCTX2E. Chamberlain's instructions for installation, Every other TCTX2E is always programmed with operation and care; failure to provide necessary maintenance and adjustment; or any adaptations the first TCTX2E (Master). Whenever programming is carried out by of or alterations to the products), labor charges for means of the learning function on the back panel dismantling or reinstalling of a repaired or of the master, the respective transmitter will only replaced unit or replacement batteries. [. . . ] On the back of the central switch press in the hole near Learn. The roller shutters can now rights against the retailer arising from their be opened and closed as desired individually with sales/purchase contract. In the absence of applicable national or EU legislation, this warranty the respective master transmitter or will be the purchaser's sole and exclusive remedy, simultaneously with the central switch. And neither Chamberlain nor its affiliates or distributors shall be liable for any incidental or consequential damages for any express or implied CHAMBERLAIN Operating/installation instructions TCTX2E Radio Wall Switch No representative or person is authorized to assume for Chamberlain any other liability in connection with the sale of this product. [. . . ]