User manual CHAMBERLAIN WTMZ1 INSTALLATION

[. . . ] During this the devices should be no further than 5 metres from one another. Please carry out all the necessary settings before fitting the sensor. We reserve the right to make technical changes in the interests of progress. Stick the TCLS1ED on the glass pane at the position the shutter should travel to for desired lighting. [. . . ] press both knobs on the sensor simultaneously. The LED briefly lights up in red, release knobs. The LED then flashes in yellow and green. While it is flashing press key 2 on the sensor. The roller shutters will completely close now 15 minutes after reaching the set brightness level. Press the two knobs on the TCLS1ED simultaneously until the LED briefly lights up in red. Press the lower knob on the sensor until the LED lights up in red. Complete closing has now been deactivated but the settings are retained. Reactivation of complete closing Press the two knobs on the sensor simultaneously until the LED lights up in red. Press lower knob until the LED turns yellow. The TCLS1ED will react against blows against the window pane and will trigger complete closure of the roller shutters. Move this dot with the DOWN key to the right end of the black bar and then press the UP key twice. Now select Mode, then Sensor and then Only+ Sun symbol. The roller shutter closes and opens again on reaching the set brightness levels with a delay of 15 minutes. Wait until the time of day when the roller shutter should close. Press the suction head onto the inside of the window pane (in case the shading function has not already been adjusted). The sun symbol at the top right of the display now changes into a moon symbol. The present level of brightness is again showed as a black bar. The level of light after which the roller shutters should close (set value), is shown as a small dot in the lower left corner of the bar. Move this dot with the DOWN key to the right end of the black bar and then press the UP key twice. Now select Mode, then Sensor and then Only+ Moon symbol. The roller shutter now closes completely upon reaching the set brightness level. [. . . ] This warranty does not affect the purchaser's statutory rights under applicable national legislation in force nor the purchaser's rights against the retailer arising from their sales/purchase contract. In the absence of applicable national or EU legislation, this warranty will be the purchaser's sole and exclusive remedy, and neither Chamberlain GmbH nor its affiliates or distributors shall be liable for any incidental or consequential damages for any express or implied warranty relating to this product. No representative or person is authorized to assume for Chamberlain GmbH any other liability in connection with the sale of this product. Chamberlain GmbH to the first retail purchaser of this product that the product shall be free from any defect in materials and/or workmanship for a period of 24 full months (2 years) from the date of purchase. [. . . ]