User manual CHEVROLET CAMARO 2010

[. . . ] 2010 Chevrolet Camaro Owner Manual M Keys, Doors and Windows . 4-6 Warning Lights, Gages, and Indicators . 7-3 2010 Chevrolet Camaro Owner Manual M Driving and Operating . 10-2 Recommended Fluids, Lubricants, and Parts . [. . . ] With the driver's door open, you will find the label attached below the door lock post. The Tire and Loading Information label shows the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds. The Tire and Loading Information label also shows the tire size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 948 and Tire Pressure on page 955 . There is also important loading information on the Certification label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight { WARNING Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). If you do, parts on the vehicle can break, and it can change (Continued) Label Example A vehicle specific Tire and Loading Information label is attached to the vehicle's center 8-14 Driving and Operating there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 - 750 (5 x 150) = 650 lbs). 5. Determine the combined Rating (GAWR) for the front and rear axle. See "Certification Label" later in this section. Steps for Determining Correct Load Limit 1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs" on your vehicle's placard. 2. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing Example 1 A. Vehicle Capacity Weight for weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals a trailer, the load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. See Trailer Towing on page 853 for important information on towing a trailer, towing safety rules and trailering tips. Example 1 = 453 kg (1, 000 lbs). B. Subtract Occupant Weight @ 68 kg (150 lbs) × 2 = 136 kg (300 lbs). C. Available Occupant and the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs and Cargo Weight = 317 kg (700 lbs). Driving and Operating 8-15 seating positions. [. . . ] 2-48 INDEX Replacing Safety Belt System Parts After a Crash . 2-21 Reporting Safety Defects Canadian Government . 8-19 Ride Control Systems Limited Slip Rear Axle . . 2-20 How to Wear Safety Belts Properly . [. . . ]