User manual CHICAGO 94122

[. . . ] Do not allow children to handle this product. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children. For technical questions, please call 1-800-444-3353. [. . . ] The operator must understand that common sense and caution are factors, which cannot be built into this product, but must be supplied by the operator. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. SKU 94122 For technical questions, please call 1-800-444-3353. Page 3 SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1. Make sure the Oil Drain is used only on a dry, oil/grease free, flat, level, ground surface capable of supporting the weight of the unit and contents. Do not work under the vehicle without proper support devices. Prior to using the Oil Drain Dolly, make sure to read and understand all warnings, safety precautions, and instructions as outlined in the vehicle manufacturer's and the support device's instruction manuals. Do not allow anyone in the vehicle while using the Oil Drain. Keep all bystanders a safe distance away from the vehicle. Allow the engine oil to completely cool before draining the oil into the Oil Drain Dolly. Do not leave the Oil Drain unattended when operating or evacuating oil. Never use the Oil Drain near open flames or heat sources. Make sure to remove the Oil Drain and all other tools and equipment before lowering the vehicle to the floor surface. Follow guidelines for engine oil disposal. Used engine oil should be removed from the vehicle and properly disposed of or recycled. Contact your local solid/liquid waste authority for information on recycling and/or disposal. Oil contains hazardous chemicals which may be harmful to the environment and hazardous to your health. 2. 8. 9. 10. UNPACKING When unpacking your Oil Drain, check to make sure that the parts shown on the assembly diagram at the end of the manual are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. SKU 94122 For technical questions, please call 1-800-444-3353. Page 4 ASSEMBLY NOTE: Please refer to the Assembly Diagram on page 8 for the following assembly instructions. Insert Funnel (2) into the Upper Tube (3) and secure it using two Screws (1). Connect the Upper Tube (3) to the Lower Tube (4). Secure it using a Bolt (9), a Washer (10), and a Nut (11). Put the Lower Tube (4) into the Tank (6). Tighten the Adjusting Clamp (5), securing the Lower Tube (4) in place. OPERATION WARNING! [. . . ] This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. [. . . ]