User manual CHICAGO 95575

[. . . ] Distractions can cause you to lose control. For technical questions, please call 1-800-444-3353. Page 2 SKU 95575 PERSONAL SAFETY 1. Watch what you are doing, and use common sense when operating tools. [. . . ] If unreadable or missing, contact Harbor Freight Tools® for a replacement. Always maintain a firm grip on the tool with both hands. Keep the outer body of Grease Gun dry, clean, and free from oil and grease. Industrial applications must follow OSHA requirements. Make sure to read and understand all instructions and safety precautions as outlined in the manufacturer's manual for the vehicle (or object) you are lubricating. This Grease Gun is designed only to hold and dispense grease. Never use the Grease Gun to hold and dispense any other material. The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 6. 7. SAVE THESE INSTRUCTIONS INSTALLING AND REPLACING THE GREASE CARTRIDGE REPLACING THE GREASE CARTRIDGE 1. Unscrew and remove the Extended Pipe (14) from the Head (11). 1) Pull the T-Grip Handle (1) all the way back and lock it in place. 2) Unscrew the Barrel (3) from the Head (11). Remove the cap from both ends of the 3 ounce grease cartridge. Note: Open and prepare cartridge per the manufacturer's instructions. Insert the cartridge into the Head (11). Slide the Barrel over the cartridge and back into the Head. 3) Depress the Clamp (2) and push T-Grip Handle (1) forward as far as it will go. Extended Pipe (14) Clamp (2) 4. 5. Figure 2 T-Grip Handle (1) Head (11) Figure 3 Figure 1 Barrel (3) Barrel (3) SKU 95575 For technical questions, please call 1-800-444-3353. Page 4 SUCTION FILLING FROM BULK GREASE CONTAINER 1. Unscrew and remove the Head (11) from the Barrel (3). Insert the open end of the Barrel (3) into the lubricant. Slowly pull the T-Grip Handle (1) back while pushing the Barrel (3) deeper into the lubricant to prevent air pockets from being pulled into the Barrel (3). [. . . ] To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. proof of purchase date and an explanation of the complaint must accompany the merchandise. if our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. [. . . ]