User manual CHICAGO 96279

[. . . ] Cluttered benches and dark areas invite accidents. do not use this product in rain or wet conditions. Water entering this product will increase the risk of electric shock. Watch what you are doing, and use common sense when using this product. [. . . ] Make sure the vehicle lighter socket has a minimum capacity of 12 amps. Do not use a socket extension or pigtail to operate this Light. Follow all local and state laws regarding vehicles and lighting systems for vehicles, check with your local department of Motor Vehicles or police station for guidelines. the revolving emergency light is not waterproof. Do not submerge the Light, or use it in extremely wet conditions. 7. 8. 9. 17. 18. SKU 96279 For technical questions, please call 1-800-444-3353. Page 3 19. be careful to avoid scratching or damaging the surface of the vehicle with the revolving emergency light. Harbor Freight tools is not responsible for any damage to the vehicle, its exterior or interior paint or surfaces which result from use of the revolving emergency light. people with pacemakers should consult their physician(s) before using this product. electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker. 20. unpAcKinG When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. AsseMbly instructiOns 1. Make sure the On/Off Switch of the Revolving Emergency Light is in its "OFF" position and that it is unplugged from its electrical outlet before installation or replacing a fuse or bulb. Your Revolving Emergency Light comes completely assembled. Instructions on replacing the Fuse and installing the Revolving Emergency Light are outlined on the following pages. 2. replacing the Fuse Cover Fuse 1. If the Revolving Emergency Light fails to operate when plugged into the cigarette lighter adapter receptacle, the Fuse should be changed - see Figure 1. REV 07K SKU 96279 For technical questions, please call 1-800-444-3353. Page 4 Figure 2 Screws (7) Cover (1) Base (6) 2. Unscrew each of the Screws (7) from the Base (6). Remove the Cover (1) from the Base (6)- see Figure 2. Separate both sides of the Fuse Cover (16) and pull out the Fuse-see Figure 1. Do not replace with a different size fuse, as this may result in excessive heat and damage to the product. The new fuse must be of the same size and amperage. replacing the bulb Figure 3 Bulb (3) socket 1. 2. Unscrew each of the Screws (7) from the Base (6). Make certain to wear leather work gloves when replacing the Bulb. Applying slight pressure, push down on the Bulb (3) and twist it so that it slides out of the socket. If it does not move or come out of the socket with light pressure, have it replaced by a qualified service technician. [. . . ] THIS WARRANTY IS ExPRESSLY IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. [. . . ]