User manual CHICAGO 97230

[. . . ] No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. read this material before using this product. Failure to do so can result in serious injury. SAVe thiS MAnuAl. For technical questions or replacement parts, please call 1-800-444-3353. [. . . ] It is not to be used for lifting operations. Use the correct product for your application. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect its operation. If damaged, have the Tie Down repaired before use. Many accidents are caused by poorly maintained products. Use the Tie Down in accordance with these instructions and in the manner intended for the particular type of product, taking into account the working conditions and the work to be performed. Use of the product for operations different from those intended could result in a hazardous situation. Maintain labels and nameplates on the Tie Down. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 7. 16. SpeciFicAtionS Working Load Size of Tire 3, 333 Pounds Up to 14-7/8" unpAcKing When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. SKU 97230 For technical questions, please call 1-800-444-3353. Page 2 inStructionS read the entire generAl SAFety ruleS section at the beginning of this manual including all text under subheadings therein before set up or use of this product. [. . . ] Check for loose screws, misalignment or binding of moving parts, cracked or broken parts and any other condition that may affect its safe operation. AFter uSe, clean external surfaces of the tool with clean, moist cloth. 2. pleASe reAd the FolloWing cAreFully THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROvIDED THE PARTS LIST AND ASSEMBLy DIAgRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. [. . . ]