User manual CHICAGO 97966

[. . . ] Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. For technical questions or replacement parts, please call 1-800-444-3353. unpacking If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this document as soon as possible. 4. use precautions This product is not a toy. [. . . ] Keep installation area clean and well lit. Keep bystanders out of the area during installation. Do not install when tired or when under the influence of drugs or medication. 5. 7. For technical questions, please call 1-800-444-3353. assembLY instructions read the entire important saFetY inFormation section at the beginning of this document including all text under subheadings therein before set up or use of this product. 8. If the Lights are to work independently of the vehicle's lights, mount the Switch at a convenient location with the two Short Screws (3). Connect the Lead Wire to the middle terminal of the Switch (7). 9. installation 1. The planned mounting area must provide a flush fit to the bottom of the Lights (1). Remove the lens from each Light and use the base of the Light as a template to mark mounting holes. Ensure that the installation area has no hidden electrical or stereo lines before drilling. Drill the holes, then secure each of the Lights with two Long Screws (2). Connect the wire of each of the Lights to the Lead Wire (8) using a Wire Splice (4). Insert the two wires into the holes of the Splice and use pliers (not included) to push down the metal tab. Connect the Fuse Holder (5) to the top terminal and connect to a 12V power supply. Connect the Ground Wire (6) to the bottom terminal of the Switch and the other end to ground. This product is intended only to be mounted on the top of a vehicle's cab. Installation of these products must comply with DOT regulations and all applicable State and local laws. 2. 3. 4. pLease read the FoLLoWing careFuLLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER ASSUMES ALL RISK AND LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. 5. [. . . ] If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. [. . . ]