User manual CHICAGO 99857

[. . . ] 1. 5 Amp ElEctronic onboArd bAttEry chArgEr 99857 SEt up And opErAting inStructionS distributed exclusively by harbor Freight tools®. 3491 Mission Oaks Blvd. , Camarillo, CA 93011 Visit our website at: http://www. harborfreight. com read this material before using this product. Failure to do so can result in serious injury. SAVE thiS mAnuAl. Copyright© 2008 by Harbor Freight Tools®. [. . . ] WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. (California Health & Safety Code § 25249. 5, et seq. ) 15. WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code 25249. 5, et seq. ) 16. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 10. Do not leave the Charger unattended when it is plugged into an electrical outlet. Unplug the Charger from its electrical outlet before leaving. The battery charger may get hot during use. The charger's heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment. Do not place the charger on a flammable surface. Do not obstruct any vents on the charger. Especially avoid placing the charger on carpets and rugs; they are not only flammable, but they also obstruct vents under the charger. 12. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should: · Avoid operating alone. · Do not use with power switch locked on. · Properly maintain and inspect to avoid electrical shock. · Any power cord must be properly grounded. Ground Fault Circuit InterSKU 99857 SAVE thESE inStructionS. For technical questions, please call 1-800-444-3353. Page 5 grounding to prEVEnt ElEctric ShocK And dEAth From incorrEct grounding WirE connEction: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. do not modify the power cord plug provided with the tool. never remove the grounding prong from the plug. [. . . ] AFtEr uSE, clean external surfaces of the tool with clean cloth. if the supply cord of this battery charger is damaged, it must be replaced only by a qualified service technician. 6. Periodically check the Battery Charger during operation to be sure it does not overheat. Before starting or operating the vehicle, unplug and put away the extension cord. 7. mAintEnAncE And SErVicing Procedures not specifically explained in this manual must be performed only by a qualified technician. to prEVEnt SEriouS injury From tool FAilurE: do not use damaged equipment. [. . . ]