User manual CISSELL CSHW35-HW55-164
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CISSELL CSHW35-HW55-164. We hope that this CISSELL CSHW35-HW55-164 user guide will be useful to you.
Lastmanuals help download the user guide CISSELL CSHW35-HW55-164.
Manual abstract: user guide CISSELL CSHW35-HW55-164
Detailed instructions for use are in the User's Guide.
[. . . ] Contents
1 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Technical data and dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The programmed number of revolutions appears on the left display. Each time you press the ECO button (E), the spin decreases with 25 rpm ( min. 500). Each time you press the START button (S), the spin increases with 25 rpm (max. 999).
Remark :
This function has to be selected before final spin has started.
19
4
End of a program
At the end of a program, while the door is being released, the left display shows End; and the Start-LED is switched off. After that only the right display will continue to show the program number. This is the end of the program.
Premature ending of the program By pressing the START-button (S) during the program, the Start-LED is switched off and the water is drained from the machine. As long as the water has not reached the safety level, the door will remain sealed and the display will show SLE (Safety Level) on the left display. Afterwards the display will temporarily show End on the same display and the Start-LED will be switched off. After that only the right display will continue to show the program number. This is the end of the program.
Remark:
If any attempt is made to interrupt the program prematurely during a spin phase of the program, all functions on the display will be temperary replaced by blinking horizontal dashes. After that only the right display will continue to show the program number and the door will be released. This is the end of the program.
20
4
Remarks:
Freely programmable stop-function Before starting a program it is possible to preprogram a time stop in every program segment. This function permits special additional functions like adding bleach or extra detergent to the wash bath. Programming: After selecting the program, press the ECO-button (E) and keep it depressed. Now push the START-button (S) simultaneously and release same. The left display now shows StO (Stop) and the right display shows the program number. The first program sequence LED is switched on. Confirm by pressing the START-button (S) if a time stop is required in this phase of the program. If no time stop is needed, press the ECO-button (E) to move on to the next segment of the program. Run through the entire program in this way. If needed, return to previous segments by pressing the SELECT-button (P). Errors can be corrected by returning to the erroneously programmed time stop in the segment and correcting by pressing the START-button (S). [. . . ] 30
1/3
321 321 321
6
Error messages
When one of the following malfunctions occurs during a program, the central display will communicate the appropriate error message at the end of the cycle. E3 (Eprom) The Eprom is wrong, replace it by another.
Remark :
For coin op machines, it is possible that a program number appears on the right display in combination with E3. This indicates a wrong price adjustment for this program. A coin value 0 or bigger than 1000 was programmed. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CISSELL CSHW35-HW55-164
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CISSELL CSHW35-HW55-164 will begin.
