User manual CITIZEN WATCH C390

[. . . ] 55 60 NAUT . 70 70 ST AT . 50 50 4 5 4 40 55 8 0 5 8 0 90 40 24 18 6 12 ME C TT 24 2 22 4 20 18 6 16 8 14 12 10 80 10 10 35 35 11 11 12 30 SE AL 30 P 13 12 A L-1 H D ST C KM . 13 R L A L-3 A -2 1 4 15 15 16 16 17 17 18 18 19 19 20 2 1 22 23 20 2 12 24 2 23 2 24 2 5 5 1 4 English CONTENTS 1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Names of Components and Major Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Turn the crown while in the normal position and set the mode hand to the mode setting [SET] mode. The city can be changed by pulling out the crown to the first click (for changing cities between SET and OFF and for setting the location for switching to daylight savings time). Turn the crown to access the city to be set. · Turning the crown continuously causes the cities to advance rapidly. Press button (A) to set the city and press button (B) to set daylight savings time. After setting, return the crown to the normal position. <Registration of Arbitrary City and Time Difference> <Confirming Set Cities> 1. When button (A) or button (B) is pressed when the watch is in the zone setting [SET] mode (with the crown in the normal position), the city name and SET or OFF are displayed each time the button is pressed. · Only those cities for which SET is displayed can be accessed from each mode. 1. Turn the crown while in the normal position and set the mode hand to the zone setting [SET] mode. When the crown is pulled out to the second click, the watch enters the correction state for the third letter of the city name. 38 39 3. Turning the crown displays those characters that are used for city names. · Turning the crown continuously causes the characters to advance rapidly. The correction location changes each time button (A) is pressed. When button (A) is pressed during the correction state of the first character of the city name, the watch enters the correction state for the time difference from UTC. Turn the crown to display the time difference. After setting, return the crown to the normal position. <Characters and Symbols Used in City Names> · Letters of the alphabet (A to Z) · Numbers (0-9) · Symbols (--: hyphens, : blank spaces) <Display Sequence> When the crown is turned forward (clockwise), the display changes in the order of letters (A-Z), numbers (0-9) and then symbols ( : blank spaces, --: hyphens). When the crown is turned backward (counter-clockwise), the display sequence is opposite that when turning the crown forward. 40 41 <Order in which Registered Cities are Displayed> The location having the same time difference among the 30 cities pre-registered in this watch is displayed first. However, a city is not displayed if the time difference of a registered city has not been set. 13. Low Battery Warning Function When battery capacity becomes low, the second hand begins to move two graduations (two seconds) at a time to inform the wearer that the battery has nearly reached the end of its life. Replace the battery promptly when this happens. <Canceling Registered Cities> 1. Turn the crown to set the mode hand to the zone setting [SET] mode. When the crown is pulled out to the second click (city setting position), the watch enters the city name correction state. [. . . ] Water may enter the watch and compromise water-resistance. · If the watch is used in seawater, rinse with fresh water afterward and wipe with a dry cloth. 54 55 NOTE: Avoid using solvents (thinner, benzine, etc. ), as they may mar the finish. WARNING: Handling of the battery · Keep the battery out of the reach of small children. If a child swallows the battery, contact a physician immediately. CAUTION: Replacing the battery · For replacement of the battery, take your watch to your dealer or Citizen Service Center. · Replace the battery as soon as possible if the service life of the battery has expired. [. . . ]