User manual CITIZEN WATCH D20

[. . . ] Setting Instructions for Movement Caliber D200, D202, D206, D208 CONTENTS (click on a topic) 1. Abnormal Pressure Sensing Error Warning SPECIFICATIONS NAME OF EACH PART a. Symbol marks indicated by the dot indicator and their meanings HOW TO CHANGE THE MODE [FUNCTION] TIME AND CALENDAR MODE HOW TO SET THE TIME AND CALENDAR ALARM MODE DIVING MODE a. Meanings of "valid diving" and "invalid diving" used for this watch SURFACE MODE LOG MODE TRANSFER MODE ALL-RESET PROCEDURE BATTERY LIFETIME FORECAST AND BATTERY 2. [. . . ] o (If the3lst dive is performed, the oldest data is deleted data, and the data of the latest 3O dives are recorded. ) o Profile data: (Cannot be checked with the watch. Transfer these data to a personal computer and check them together with the other log data. ) The profile data are the depths measured every 5 seconds and water temperatures measured every 5 minutes in the diving mode. If the log data contains the profile data, the dot indicator indicates "PLOG The profile data of up to the latest 6 hours can be stored. If the total diving time exceeds about 6 hours, the stored data are deleted from the oldest one. Accordingly, it is recommended to transfer the profile data to a personal computer before the total diving time exceeds about 6 hours. LOG MODE Indication mode when no data is recorded When Profile Data is Stored Return to Table of Contents Return to Table of Contents The log data are indicated, divided into the first log data and second log data. Change them over by pushing the (A)(lower right) button. First log data: Maximum depth, diving time, month and date of diving, diving No. , and diving start time Second log data: Average depth, lowest water temperature, diving finish time How to call the log data Push the (B)(Upper right) button, and the recorded log data are indicated in order from the latest one. Push the (C) (Upper left) button, and the recorded log data newer than the one currently indicated are indicated in order from the currently indicated one. How to delete all the log data Push the (B)(Upper right) button and (C) (Upper left) button at the same time and hold for 2 seconds, and an alarm sound comes out and all the log data and profile data are deleted. 11. TRANSFER MODE In this mode, the diving data can be transferred to a personal computer. In this mode, the data in the watch can be transferred to a personal computer by using the communication unit and RS-232 straight cable. Applicable personal computer: IBM PC/AT or compatible (Some models may not be usable). Log data to be transferred which contain profile data: Eight data of maximum depth, average depth, diving time, month and date of diving, diving No. , diving start time, lowest water temperature, and diving finish time. Connection: *Before connecting the cable, be sure to read the "User's manual for the communication unit AQUALAND GRAPH". (1) Confirm that the power switch of the personal computer is turned off. (2) Connect the personal computer and communication unit by the RS-232C straight cable. (3) Turn on the power switch of the personal computer, and start the AQUALAND GRAPH. (4) Set the watch to the transfer mode, and call the data to be transferred. (How to call) If the watch is set to this mode the log data containing the latest profile data is indicated first. If the watch is changed from the log mode to the transfer mode, however, the log data containing the profile data which has been indicated in the log mode is indicated. Push the (B)(Upper right) button, and the profile data are indicated in order from the latest one. [. . . ] Be sure the crown is completely pushed in prior to any contact with moisture. If your model is equipped with a screw down crown, be sure it is properly seated against the case. Do not operate the crown or any push button when the watch is wet as this may allow the entrance of moisture. If at anytime, you notice moisture in your timepiece that does not clear in a short period of time, you should send your timepiece as soon as possible to the nearest Authorized Service Center for inspection. [. . . ]