User manual CITIZEN CL-S700DT

[. . . ] CL-S700DT USER'S MANUAL Direct Thermal Barcode & Label Printer CONTENTS Before Operation INTRODUCTION -------------------------------------------------------------------------------- 3 COMPLIANCE STATEMENT FOR EUROPEAN USERS ----------------------------------- 4 FCC COMPLIANCE STATEMENT FOR AMERICAN USERS ------------------------------ 4 EMI COMPLIANCE STATEMENT FOR CANADIAN USERS ------------------------------ 5 ETAT DE CONFORMITE EMI A L'USAGE DES UTILISATEURS CANADIENS --------- 5 IMPORTANT SAFETY INSTRUCTIONS------------------------------------------------------ 6 NOTICE -------------------------------------------------------------------------------------------- 7 SAFETY INSTRUCTIONS----------------------------------------------------------------------- 8 Chapter 1 Setup Confirmation of Carton Contents ---------------------------------------------------------10 Part Names and Functions------------------------------------------------------------------11 Connection to Power ------------------------------------------------------------------------17 Driver Installation -----------------------------------------------------------------------------17 Connection to a Computer -----------------------------------------------------------------18 Chapter 2 Printer Operation Power ON/OFF ---------------------------------------------------------------------------------19 Normal Operating Mode --------------------------------------------------------------------20 Setting the Media -----------------------------------------------------------------------------22 Mode Settings ---------------------------------------------------------------------------------26 Emulation Auto-Detection -----------------------------------------------------------------41 Chapter 3 Printer Adjustments Sensor Adjustments and Calibration ----------------------------------------------------42 Media Thickness Adjustment --------------------------------------------------------------45 Media Width Adjustment -------------------------------------------------------------------46 Cleaning -----------------------------------------------------------------------------------------47 Chapter 4 Troubleshooting -----------------------48 Appendixes Specifications ----------------------------------------------------------------------------------50 Interfaces----------------------------------------------------------------------------------------53 Connecting the Optional Interface Board ----------------------------------------------59 2 INTRODUCTION Thank you for purchasing a Citizen label printer featuring high performance printing, easy media loading and unique front access. Main Features <Easy Access - Easy Operation> <Hi-OpenTM printer case> The printer is designed for all day-to-day operations to be accessible from the front of the printer so there is no need to move items near to the printer for access for media loading. The main printer's case lifts directly upwards meaning that no space is needed on either side of the printer. The power switch is located in a recessed panel at the front of the printer so it can be easily accessed without moving the printer. <The Easiest Media Loading> The Hi-LiftTM metal print head mechanism opens so that it is completely clear of the media path so that the paper can be loaded without any part of the printer in the way. <Easy Printer Control and Configuration> <Dual Programming Language> <Interfaces and Options> The clear, easy-to-see backlit LCD makes both configuration and operation easy with simple messages about the printer's status and also the ability for quick configuration when needed. This printer contains both the Datamax® and Zebra® emulations. By using the keys on the operation panel, it is easy to simply switch between the two emulations to meet your program. Serial and USB interfaces are supplied as standard and optional Parallel interface, Ethernet and Wireless LAN boards can be fitted quickly and easily. An auto-cutter and peeler option is also available and can be easily installed. 3 COMPLIANCE STATEMENT FOR EUROPEAN USERS CE marking shows conformity to the following criteria and provisions: Low Voltage Directive (2006/95/EC)/EN60950-1 EMC Directive (2004/108/EC)/EN55022, EN55024, EN61000-3-2 & EN61000-3-3 This product has been tested under EN ISO 7779 and has an acoustic level output no higher than 55db(A). [. . . ] Datamax® Emulation Top Menu Page Setup Sub Menu Print Speed Print Darkness Darkness Adjust [Darkness Adj] Continuous Media Length [Cont Media Len] Vertical Position [Vertical Pos] Horizontal Shift [Horizontal Shif ] Vertical Image Shift [Vertical Image] Media Sensor Default 7 IPS 12 00 4. 00 inch 101. 6 mm 0. 00 inch 0. 0 mm 0. 00 inch 0. 0 mm 0. 00 inch 0. 0 mm See Through Menu 2 to 7 IPS 00 to 30 -10 to 10 0. 25 to 32. 00 inch 6. 4 to 812. 8 mm -1. 00 to 1. 00 inch -25. 4 to 25. 4 mm -1. 00 to 1. 00 inch -25. 4 to 25. 4 mm 0. 00 to 32. 00 inch 0. 0 to 812. 8 mm See Through Reflect None On Off 0. 25 to 1. 00 inch 6. 4 to 25. 4 mm 50 symbols ­ 0. 0 V to 3. 0 V 0. 01 V to 3. 00 V On Printing Immediate On Off Exec/Err All Error Key None Inch mm Remarks Printing speed setting. Setting media length of continuous media. Adjusttheoffsetvalueinverticalwhen mapping data on a RAM. Selecting media sensor. System Setup Small Media Adjustment [Small Media Adj] Small Media Length [Small Media Len] Symbol Set Sensor Monitor Sensor Level Paper End Level Error Reporting [Error Report] Cover Open Sensor [Cover Sensor] Buzzer Select Off Setting for small media. 1. 00 inch 25. 4 mm PM ­ 1. 4 V 2. 80 V On Printing Off Exec/Err Setting media length for small media. Displays level of sensor that is currently selected. Setting buzzer sounding conditions. Metric/Inch [Metric/Inch Sel] Inch Sets the units. 34 Printer Operation Mode Settings [Datamax® Emulation] Top Menu Sub Menu Max Media Length [Max Media Len] Settings Lock Keyboard Lock Default 10. 00 inch 254. 0 mm Off Off Menu 1. 00 to 50. 00 inch 25. 4 to 1270. 0 mm On Off On Off Remarks Sets the maximum media length. Prevents a command changing the set value. Note: Hold down the Menu Key for at least 4 seconds to enter the Menu Setup Mode when setting the "On" menu. Switches command mode of DMX mode. Control Code STD Emulation Select [Emulation Sel] DM4 STD ALT ALT-2 DM4 DMI DPP ZPI2 On Off Full Auto On Off After Print Emulation Auto Detect [Emulation Auto] AutoConfigure [Auto Config] On Selects DataMax®/Zebra® compatibility DM4: DataMax® 400 DMI: DataMax® IClass DPP: DataMax® Prodigy Plus® ZPI2: Zebra® 2844Z Setting emulation (as above) auto detection. On Function Select [Function Sel] Tear Off Tear Peel On* Cut On** Cutter Type Standard Standard Heavy Duty Backfeed Through Cutter Action Backfeed Peel Wait Delay** 0. 1 sec 0. 1 to 2. 0 sec Paper Position 0. 00 inch 0. 00 mm Peel/Cut/TearOff 0. 00 to 2. 00 inch 0. 0 to 50. 8 mm Peel/Cut/Tear On -1. 00 to 1. 00 inch -25. 4 to 25. 4 mm Automatically configures optional devices. On. . . . . AutoConfigure enabled (Regardless of whether Function Select is set, if a peeler or cutter is installed, each mode is set automatically. ) Off . . . . AutoConfigure disabled (A peeler of cutter is installed, but to not operate thepeelerorcutter, turnitOffand the operation is selected by Function Select. ) Selects the operation when the AutoConfigureissettoOff. Designatesthe paper position based on each option. The operation of this device is enabled during selection. At the same time, the parameters of the f command of Prodigy Plus are emulated for each optional device. Standard: Model JN98901 Heavy Duty: Model JN98911 Sets the cutter action. With the optional AutoConfigure On, printing is executed only when the cutter is installed or only when Cut is selected by Function Select. Through is set at the rear end of sheets 1 to n-1 when the number of copies = n, and the rear end of the final page of single sheet and copy is backfeed. Displays only machines with a peeler installed. It is based on the inch/millimeter setting. There are initial values of the stop position for each device set above, and later, relative values are set. * Only when peeling option is mounted. ** Only when cutter is mounted. 35 2 Printer Operation Mode Settings [Datamax® Emulation] Top Menu Sub Menu Menu Key Action Default Enters Menu Menu Enters Menu Repeat Last Set Repeat Last One Remarks Sets the menu key action. Enters Menu: Enters the menu setup mode. Repeat Last Set: Repeats the number of copies. Repeat Last One: Last one is issued only for the final page. [. . . ] 2µsec 57 Appendixes Interfaces USB Interface Specifications Standards Transmission speed Receivebuffer Connector Complies with Universal Serial Bus Specification Compatible with 12Mbps (full speed) transmission 16K bytes DUSB DUSB-BRA42-T11(DDK) Signal line and pin arrangement Pin No. 1 2 3 4 Signal code VBUS D+ D­ GND Signal USB power Signal line + Signal line ­ GND Function USB power (+5V) + signal line ­ signal line GND 58 Appendixes Connecting the Optional Interface Board Caution Always turn off the power to the printer before connecting the optional interface board. Do not pull the interface cable out with unnecessary force. This will cause an accident. Replacement Method 11 Remove the screws (2) of the interface cover then pull the interface cable towards you1 When you do this, be careful not to perform any unreasonable operations that will damage the connecting cable and do not pull the cable too much1 If you do, it will cause a malfunction1 Interface Cable Interface Cover Rear Side Screw 21 Connect the cable to the connector of the optional interface board1 Interface Board Rear Side Interface Cable 59 Appendixes Connecting the Optional Interface Board 31 Insert the interface board into the printer so that the connecting cable does not catch on the printer, then use the screws (2) that you removed to anchor the bracket1 Interface Board Rear Side Screw 60 En If you want to dispose this product, do not mix with general household waste. [. . . ]