User manual CITIZEN CT-S2000DC

[. . . ] This printer conforms to the following Standards: This declaration is applied only for 230V model. IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. [. . . ] For severe stains, use a soft cloth slightly dampened with water. Never use organic cleaning solvent such as alcohol, paint thinner, trichloroethylene, benzene, or ketone. never use a chemically processed cleaning cloth. The thermal head is at a dangerously high temperature immediately after printing. Allow it to cool off before launching maintenance work. The CT-S2000/CT-S2000DC are thermal line printers designed for use with a broad array of terminal equipment including data, POS, and kitchen terminals. With extensive features, they can be used in a wide range of applications. Drop-in Paper Roll mechanism facilitating easy paper handling and head cleaning. drip-proof design High speed (220 mm/s) printing. Versatile Roll Capacity with ability to use 83 mm, 80 mm, 60 mm and 58 mm wide paper rolls. Can use paper roll with a maximum of 102 mm diameter. User customization such as memory switch setting are available. When unpacking the printer, confirm that the following are provided: Printer: AC adapter (Option, only for CT-S2000DC): AC power cord (Option, only for CT-S2000DC): Sample paper roll: User's manual (This manual): 1 1 1 1 roll 1 AC power cord CT-S2000 (AC power type) The printer models are classified by the following designation method: Power supply No marking: AC power type (built-in power supply) DC: DC power supply type Interface PA: IEEE1284 & USB RS: RS-232C & USB UB: USB only (Option) Font A Font B Font C Character size Character type User memory Types of bar code Line spacing Paper roll Interfacing Cash drawer interface Input buffer Supply voltage Power consumption AC adapter 23 mm (1/6 inch) Thermal paper roll: 83 -1 mm/80 -1 mm/60 -1 mm/58 -1 mm ×Maximum 102 mm Paper thickness: 65-85 µm Serial (RS-232C compliant), Parallel (IEEE 1284 compliant), USB 2 cash drawers are supported. Operating temperature 5 to 45°C, 10 to 90% RH (No condensation) and humidity Storage temperature and humidity Reliability -20 to 60°C, 10 to 90% RH (No condensation) Print head life: 150 km, 2 × 108 pulses (At normal temperature/ humidity with recommended paper used) Auto cutter life:2 million cuts (At normal temperature/ humidity with recommended paper used) Notes: *1: When paper width is 83, 80, 60, 58 mm *2: The number of printable columns is selectable with a Memory Switch. The number of columns in this table refers to typical model. *4: As each character size includes the space inside the character font, actual character looks smaller. Always keep the AC power supply away from other noise generating equipment. Otherwise fire, electric shock, or power disconnection may result. If lightning is approaching, unplug the AC power cord from the wall outlet. Otherwise fire or electric shock may result. Keep the power cord away from heat generating appliances. Otherwise the shield of power cord may be fused resulting in a fire or electric shock. [. . . ] (No indication for 0/1 with memory switch 7 through 10) Selecting memory switch When the FEED button is pressed short (within 2 seconds), printing occurs in the order of "Memory SW1" "Memory SW2" "Memory SW3" . When the memory switch you want to change is reached, press and hold the FEED button (for more than 2 seconds). Selecting each switch item 2-16 items are provided for setting in each switch. By pressing and holding the FEED button long, the printer goes to the next item and prints the current setting of the item. [. . . ]