User manual CITIZEN PD24 COMMAND REFERENCE V1.10

[. . . ] CITIZEN Command Reference Model name: PD24 REVISION: 1. 10 Revision date: May 24, 2005 Citizen Systems Co. , Ltd 1 Revision list REV 1. 0 1. 1 Date 10/12/2004 5/24/2005 Details Original version (tentative version) - ESC~SI: Low baud rate support for serial interface - ESC~SI: Added the `Image generation speed' setting. 2 Contents Revision list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setting the top of form (TOF) /ESC~B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Setting power OFF time/ESC~O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Setting the return control of printer status: n=14 Sets the enabling/disabling of the return control of printer status. Sends the return control of printer status to FS G, ESC~Y when it is enabled. m=0: disabled 49 1: enabled Selecting the Font style: n=16 Selects the default setting of Font style. m=0: Roman 1: Sans serif 2: Courier 3: Prestige 4: Script Selecting the Code page: n=17 Selects the default setting of code page. m = 0: PC437 (U. S. A. ) 1: PC850 (MULTILINGUAL) 2: PC860 (PORTUGAL) 3: PC863 (FRENCH - CANADA) 4: PC865 (NORWAY) 5: SCANDINAVIA 6: YUASCII 7: PC852 (LATIN 2) 8: PC855 (CYRILLIC) 9: PC866 (RUSSIAN) 10: HUNGARIAN 11: KAMENICKY 12: TURKEY 13: PC861 (ICELANDIC) 14: WELSH 15: MAZOVIA 16: UKRAINIAN 40: NEW HEBREW 41: OLD HEBREW 42: DEC HEBREW 50: 437 GREEK 51: GREEK 851 52: GREEK ABC 53: GREEK ELOT 928 54: CYPRUS 55: MALTA 60: ARABIC NLS 61: ARABIC EXT 62: UNISYS CODEPAGE 100: BRAZIL ABICOMP 101: BRAZIL ASCII 108: LATIN 1 109: PC858 110: ISO LATIN 9 120: US ANSI 121: CYRILLIC ANSI 122: EASTERN EUROPE ANSI 50 IrCZ infrared communication speed: n=20 Sets the communication speed of the IrCZ infrared interface specification. m = 0: 9600 bps 1: 19200 bps 2: 38400 bps IrCZ infrared interface stop bit length: n=21 Sets the stop bit length of the IrCZ infrared interface specification. m=0: 1 stop bit 1: 2 stop bit Setting the Link off: n=23 Sets the link OFF control. "Link OFF control" disables the auto power-off control of the printer while the printer is detected by device detection operation of the host during IrDA communication. m=0: disabled 1: enabled Setting the Bluetooth communication mode: n=25 Sets the Bluetooth communication mode. In NORMAL, communication with any Bluetooth equipment is available. In BOND, data are authenticated with a pass key before communication is connected. These are available only with Bluetooth-equipped models. m=0: NORMAL 1: BOND Deleting the Bluetooth BOND history: n=26 When Bluetooth communication mode is switched to BOND for authentication, the history record of the authentication equipment called `link key' is saved in the printer. Based on this record, authentication can be skipped from the next time for already authenticated equipment. By enabling BOND history record deletion at this time, all history records will be deleted at the next power-ON of the printer. After records are deleted, the printer is automatically turned OFF and this setting as well automatically becomes ineffective. These are available only with Bluetooth-equipped models. m=0: invalid 1:valid Setting the QR code division mode: n=27 Sets the division barcode system of QR code. In division mode 1, the user divides data and prints out division barcodes. In division mode 2, the printer divides a given data based on division specification information and prints out division barcodes. m=0: division mode 1 1: division mode 2 Selecting the type of interface: n=28 Selects the type of interface. m=0: Cable interface 1: IrDA interface 51 3: IrCZ interface 4: USB interface 5: Bluetooth interface Bluetooth in m=5 is only for model equipped with Bluetooth interface. Setting the Cable auto selection mode: n=29 Sets the enabling/disabling of the Cable auto selection mode. [. . . ] 74 ESC N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 ESC O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 ESC p . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 ESC P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]