User manual CITIZEN SDC-810BII COMMAND LINE INTERFACE REFERENCE MANUAL

[. . . ] In einer örtlichen Umgebung kann dieses Gerät Funkstörungen verusachen. Atención Este es un producto de la clase A. En ambientes domésticos éste producto puede causar radio Interferencias en cuyo caso el usuario deberá tomar las medldas oportunas. VERWITTIGING Dit is een klasse A produkt. [. . . ] MAINTENANCE AND SERVICE For the information on maintenance and service, please contact our dealer or at the following address. Northern America CBM America Corporation Service Center 363 Van Ness Way Suite 404 Torrance, CA 90501, U. S. A TEL +1-310-781-1460 FAX +1-310-781-9157 Other Areas Japan CBM Corporation Information Systems Division CBM Bldg. , 5-68-10, Nakano Nakano-ku, Tokyo 164-0001 Japan TEL +81-3-5345-7540 FAX +81-3-5345-7541 33 CITIZEN iDP3410 User's Manual 13. PRINT CONTROL FUNCTIONS 13. 1 CBM Mode 13. 1. 1 Command List 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Command FF n SO SI LF CR DC 1 DC 2 DC 3 CAN ESC n1 n2 ESC - n ESC 1 ESC 2 ESC 3 ESC C n ESC N n ESC O ESC f 1 ESC t n ESC BEL n1 n2 BEL FS SUB RS ESC R n ESC & 0 n1 n2 ESC % n ESC / n ESC DC3 n Function Code n-line paper feed 0CH n Specifying the double width character 0EH Canceling the double width character 0FH Printing and paper feed 0AH Printing 0DH Initializing the printer 11H Specifying/Canceling the Inverted character 12H Specifying the red print 13H Canceling the print data 18H Specifying the bit image mode 1BH 2AH n1 n2 Specifying/Canceling the Underline 1BH 2DH n Specifying 1/9-inch line feed rate 1BH 31H Specifying 2/9-inch line feed rate 1BH 32H Specifying 1/6-inch line feed rate 1BH 33H Setting the page length 1BH 43H n Specifying the perforation skip 1BH 4EH n Canceling the perforation skip 1BH 4FH Form feed (Changing the page) 1BH 66H 01H Selecting the character code table 1BH 74H n Setting the external device drive pulse width 1BH 07H n1 n2 Driving command A for Drawer-1 07H Driving command B for Drawer-1 1CH Driving command for Drawer-2 1AH Buzzer-on 1EH Selecting the international character set 1BH 52Hn Defining the download character set 1BH 26H 00H n1 n2 Specifying/Canceling download character set 1BH 25H n Definition the message 1BH 2FH n Printing the message 1BH 13H n Deleting the download character, message, bit 1BH 12H n1 n2 image Defining the download, bit image 1DH 2AH n1 n2 Printing the download, bit image 1DH 2FH m Page 36 36 37 37 37 37 37 38 38 39 39 39 40 40 40 41 41 41 42 43 43 44 44 44 45 46 39 39 48 49 50 51 30 ESC DC2 n1 n2 31 GS n1 n2 32 GS / m 34 CITIZEN iDP3410 User's Manual 13. 1. 2 Description of Items XXXX [Function] [Code] Command name ALL A row of command constituent code is represented by a hexadecimal number with < >H, binary number with < >B, and a decimal number with < >. Describes an argument value (Setting range) for the command. Describes an initial value for the command when accompanied by an argument. Shows a command. [Range] [Outline] [Caution] [Default] XXX 35 CITIZEN iDP3410 User's Manual Details FF n [Function] [Code] [Range] [Outline] n-line paper feed <0C>H n 1 n 127 This command feeds the paper by n-lines. If the print buffer contains the data, use of this command feeds the paper by n-lines after printing the data. Setting n = 0 does not feed the paper. SO [Function] [Code] [Outline] Specifying the double width character <0E>H The data following this command is printed doubled in the horizontal direction. Double width characters remain valid until the double width character cancel command is entered, but they are also cancelled after they are printed one line. Note that the double width characters take up two ordinary characters worth of width. 36 CITIZEN iDP3410 User's Manual SI [Function] [Code] [Outline] Canceling the double width character <0F>H This command cancels the double width characters set with SO. The data following this command are printed in the ordinary character width. LF [Function] [Code] [Outline] Printing and paper feed <0A>H If the print buffer contains the data, this command will feed the line after printing. The power-on time is 200 ms ON and 200 ms OFF stationary. The drawers 1 and 2 cannot be driven simultaneously. RS [Function] [Code] [Outline] Buzzer-on <1E>H This command emits a short warning sound from the printer. 44 CITIZEN iDP3410 User's Manual ESC "R" n [Function] [Code] [Range] [Outline] Selecting the international character set <1B>H <52>H n 0 n 10 This command selects the international characters according to the value of n. n 0 1 2 3 4 5 [Default] Character Set U. S. A. Denmark I Sweden n 6 7 8 9 10 Character Set Italy Spain Japan Norway Denmark II Depends upon DIP switch setting. 45 CITIZEN iDP3410 User's Manual ESC "&" <0> n1 n2 [m0 m1 . . . m5 m6 m7 m8 m9] n2 - n1 + 1 [Function] [Code] [Range] [Outline] Defining the Download character set <1B>H <26>H <00>H n1 n2 [m0 m1 . . . m5 m6 m7 m8 m9] n2 - n1 + 1 32 n1 n2 255 m0 = 0 or m0 = 128 This command defines he download characters. n1 is a character code to start definition and n2 is to end definition, respectively. When defining only one character, set n1 = n2. You can define the ASCII codes ranging from 32 to 255. Once the download characters are defined, they remain valid until they are redefined or the download deletion command (ESC DC2 n1 n2) is executed. 46 CITIZEN iDP3410 User's Manual ESC "%" n [Function] [Code] [Outline] Specifying/Canceling the download character set <IB>H <25>H n This command selects/deselects the download character set. The download characters cannot be printed by simply defining them with the above-mentioned ESC & 0 command. [. . . ] Hierdurch wird die Papiervorschubwalze zurückgesetzt und das Papier freigegeben, so daß angestautes Papier beseitigt werden kann. Sämtliche Papierreste aus dem Papierweg entfernen. VORSICHT: · Beim Herausziehen des Druckpapiers (in Vorwärts- oder Rückwärtsrichtung) darauf achten, den Papier-Freigabehebel zu betätigen. 133 CITIZEN iDP3410 User's Manual 4. 8 Bedienfeld und Fehleranzeigelämpchen 1. Netzanzeigelämpchen (grün) (POWER) Leuchtet bei eingeschalteter Netzversorgung. Fehleranzeigelämpchen (rot) (ERROR) Leuchtet, wenn das Papier aufgebraucht ist oder ein Fehler im Druckmechanismus oder in der Kommunikations auftritt. [. . . ]