User manual CLARION ADB341MP

[. . . ] Thank you for purchasing the Clarion Product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card (ADB340MP only) and keep it carefully with this manual. Contents 1. [. . . ] Always add a file extension ". MP3" to MP3 file by using single byte letters. If you add a file extension other than specified or forget to add the file extension , the file cannot be played. The indication "­ ­:­ ­" appears in the play time display if you attempt to play files without MP3 data. When writing MP3 file on a CD-R disc or CDRW disc, please select "ISO9660 level 1, 2 or JOLIET or Romeo" as the writing software format. Normal play may not be possible if the disc is recorded on another format. This equipment does not support packet writing. The folder name and file name can be displayed as the title during MP3 play but the title must be within 64 single byte alphabetical letters and numerals (including an extension). 32 characters when written in JOLIET format. Do not affix a name to a file inside a folder having the same name. A disc with a folder having more than 8 hierarchical levels will be impossible. Up to 256 files (total number of folder and file) can be played. The root folder is counted as one folder. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC. ) 3. Some noise may occur depending on the type of encoder software used while recording. Multisession function When a disc contains both normal CD type tracks and MP3 type tracks mixedly, you can select which type of the recorded tracks to play. Each time you press and hold the [BND] button for 1 second or longer, the mixed mode is switched between CD type or MP3 type. The following indication appears in the title display when switching the track type to be played. q Display when CD type track is selected: q Display when MP3 type track is selected: 1. Types of recording that can be played are as follows. Setting Set to CD Disc Mixed with CD and Play CD MP3 type tracks CD type track Play CD only MP3 type track Play MP3 only Set to MP3 Play MP3 Play CD Play MP3 2. After making these settings, remove the disc and then reinsert it. When a mixed mode CD is loaded and CD is set, the track to be played first is MP3 file data and no sound is heard. Loading a CD Insert a CD into the center of the insertion slot with the label side facing up. [. . . ] No sound heard The microprocessor has malfunctioned due to noise, etc. Another compact disc is already loaded. Files are not recognized as an MP3 file. File system is not correct. Eject the compact disc before loading the new one. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. [. . . ]