User manual CLARION ARX7170R

[. . . ] After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer and TV tuner connected via the CeNET cable. The CD changer, MD changer and TV tuner have their own manuals, but no explanations for operating them are described. 11. [. . . ] Press Play/pause button 2 again to resume tape playback. 14 ARX7570z Tape Operations APC (Auto Program Control) function The APC function allows the tape to skip forward to the beginning of the next track or rewind to the start of the current track. q Skipping forward to the next track ("APCFF") During tape playback, press the right side of SEARCH button $ twice to fast-forward to the next track. q Skipping backwards to the start of the current track ("APC-REW") During tape playback, press the left side of SEARCH button $ twice to rewind to the start of the current track. The current track plays from the beginning. q Canceling FF/REW APC to resume playback Press Play/pause button 2. If you select another mode during APC mode, it is selected with APC mode continued. The mechanism automatically makes APC mode stop when it finds the next track (in APC-FF) or the start of the current track (in APC-REW). This function is called "monitor mode". 2. To cancel the intro tape scan, press SCN button 5 again. "SCN" goes off from the display and the current track continues to play. When the end of the tape is reached during the intro tape scan, the tape mechanism automatically reverses direction and continues the intro tape scan. If you select another mode during the intro tape scan, the mechanism automatically makes the intro tape scan stop when it finds the next track (APC function). Tape selection repeat The tape selection repeat continuously plays the current track. This function continues automatically until it is canceled. Turn the Rotary knob % clockwise or counterclockwise to set the correct time. The clock is displayed in 12-hour format. Entering titles Titles up to 10 characters long can be stored in memory and displayed for radio stations and CDs. The numbers of titles that can be entered for each mode are as follows. Mode Radio mode TV mode CD changer mode CDC655z connected CDC655Tz connected CDC1255z connected Number of titles 30 titles 15 titles Number of titles 60 titles 100 titles 50 titles 6. Press ENT button 2 to store the time into memory. Press ADJ button 4 to return to the previous mode. Note: · You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car's battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled. 1. Press FNC button 3 to select the mode you want to enter a title (radio, CD changer or TV). Titles cannot be entered for MDs with this unit. Dimmer level setting You can reduce the display illumination linked to the car illumination. The factory default setting is "LEVEL 3". 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button $ to select "DIMMER LV". [. . . ] Display is not accurate. The microprocessor has malfunctioned due to noise, etc. DCP or source unit connectors are dirty. DOLBY NR button 7 is not pressed. Wipe the dirt off with a soft cloth moistened with cleaning alcohol. Use a cleaning tape, etc. , to clean the head. When listening to a tape recorded with Dolby NR, press DOLBY NR button 7 and select B NR. Tape ARX7570z 23 10. [. . . ]