User manual CLARION ARX8570Z

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones ARX8570z AM/FMCASSETTEPLA YER WITHCD/MDCHANGERCONTROL · LECTEURDECASSETTEAM/FMAVEC COMMANDEDECHANGEURCD/MD · RADIODEAM/FMYREPRODUCTORDE CASETESCONCONTROLDECAMBIADORDE DISCOSCOMAPCTOS/MINIDISCOS OPEN ARX8570z Clarion Co. , Ltd. 1999/1 (A·C) All Rights Reserved. Copyright © 1998: Clarion Co. , Ltd. Printed in China / Imprimé en Chine / Inpreso en China ISR 1 2 3 4 5 6 PE-1637B 280-7231-00 Thank you for purchasing the Clarion ARX8570z. Please read this owner's manual in its entirety before operating this equipment. [. . . ] You can set the illumination pattern you prefer. The factory default setting is "PATTERN 1". Clearing titles 1. Play a CD in a CD changer or tune a radio station or TV station that you want to clear the title for. Press DISP button 0 and display the subtitle. "TITL" appears in the display and the display switches to the title input display. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button $ to select "PRISM KEY". Turn the Rotary knob % clockwise or counterclockwise to set the illumination pattern. Each time you turn the Rotary knob %, the illumination pattern changes in the following order: PATTERN 1 § PATTERN 2 § OFF § PATTERN 1. . . PATTERN 1: The color changes for each function mode, station tuning, scanning, and other operations. PATTERN 2: In addition to the changes in Pattern 1, the color changes according to the audio level. OFF: The color changes according to the function mode. ARX8570z 17 Other Handy Functions 5. Pressing ENT button 2 returns to the adjustment selection display. Press ADJ button 4 to return to the previous mode. Pressing ENT button 2 returns to the adjustment selection display. Press ADJ button 4 to return to the previous mode. Message display When the unit is powered on or off, a message is displayed. The user can turn this message display on or off. The factory default setting is "ON". Triggered audio mute for cellular telephones This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility. 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button $ to select "MESSAGE". Turn the Rotary knob % clockwise to set the message display to "ON"; turn it counterclockwise to set the message display to "OFF". Pressing ENT button 2 returns to the adjustment selection display. Press ADJ button 4 to return to the previous mode. NON-FADER output adjustment display on/off If you do not want to adjust the non-fader output level, you can turn off the "NON-FAD VOL" display. The factory default setting is "ON". [. . . ] When listening to a tape recorded with Dolby NR, press DOLBY NR button 7 and select B NR or C NR. 28 Tape ARX8570z 10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display ERROR 1 Cause Tape cannot be played due to defective tape such as cut tape. A CD inside the CD changer is not loaded. [. . . ]