User manual CLARION AX410

[. . . ] ESPECIFICACIONES Sintonizador FM Margen de frecuencias . . . . . . 87, 9 MHz a 107, 9 MHz Sensibilidad utilizable. . . . . . 11 dBf Sensibilidad de silenciamiento 50 dB . . . . . . 17 dBf Selectividad de canal alterno. . . . . . 75 dB Separación estereofónica (1 kHz). . . . . . 35 dB Respuesta en frecuencia (±3 dB) . . . . . . 30 Hz a 15 kHz Preamplificador Acción de control de bajos (30 Hz). . . . . . ±13 dB Acción de control de agudos (10 kHz). . . . . . ±10 dB Salida de línea (con CA, 1 kHz, 10 K). . . 1, 8 V Owner's manual Mode d'emploi Manual de instrucciones INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS ER WILL VOID THE WARRANTY AND WIL 1. [. . . ] 2) Turning the Rotary knob 2 clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. * The factory default setting is "0". (Adjustment range: ­6 to +6) * To turn the power off, press the POWER button for at least 1 second. 3) When the adjustment is complete, press A-M button 3 several times until the function mode is reached. English 2) Press the FNC button 4 to select the operation mode. The mode switches as follows each time the FUNC button is pressed: Radio § Tape § CD changer § Radio a component is not connected, that operation mode cannot be selected. * "NO CASS" appears when no tape is loaded in the source unit, and "NO DISC" appears when no disc is loaded in the CD changer. Adjusting the Balance 1) Press A-M button 3 and select "BAL". 2) Turning the Rotary knob 2 clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. * If * The 3) Turning the Rotary knob 2 clockwise increases the volume; turning it counterclockwise decreases the volume. factory default setting is "0". (Adjustment range: L9 to R9) * The volume level is from 0 (minimum) to 33 (maximum). 3) When the adjustment is complete, press A-M button 3 several times until the function mode is reached. Adjusting the Fader Audio Mode Adjustments Press the A-M button 3 to select the adjustment mode. The mode switches as follows each time the A-M button is pressed: BASS § TREB § BAL § FAD § Previous mode 1) Press A-M button 3 and select "FAD". 2) Turning the Rotary knob 2 clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. * The factory default setting is "0". (Adjustment range: F9 to R9) Adjusting the Bass 1) Press A-M button 3 and select "BASS". 2) Turning the Rotary knob 2 clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. 3) When the adjustment is complete, press A-M button 3 several times until the function mode is reached. Setting the Z-enhancer This unit comes with three types of sound tone effects stored in memory. Each time you press Z-EHCR button @, the tone effect changes in the following order. "Z-ENHANCER 1" § "Z-ENHANCER 2" § "Z-ENHANCER 3" § "Z-EHCR OFF" § "Z-ENHANCER 1". . . * The factory default setting is "0". (Adjustment range: ­6 to +6) * The factory default setting is "Z-EHCR OFF". 3) When the adjustment is complete, press A-M button 3 several times until the function mode is reached. 8 AX410 · · · · Z-ENHANCER 1: bass emphasized Z-ENHANCER 2: treble emphasized Z-ENHANCER 3: bass and treble emphasized Z-EHCR OFF: no sound effect Tape Operation Loading Tapes Insert the cassette tape into the Cassette insertion slot with the side on which the tape is exposed facing the right. Playback starts automatically. Loudness Function Press the LD button 3 for at least 1 second to turn the loudness function on and off. * The Switching the Display Press the DISP button 7 to enter the clock display mode. Operation mode display § Clock display § Operation mode display metal tape setting is set automatically when a metal or chrome tape is loaded. * When the end of the cassette tape is reached, the auto reverse mechanism is activated and the other side of the tape begins playing automatically. E glis Listening to a tape which is already loaded Press the FNC button 4 to select the tape mode. Playback begins automatically. Setting the Clock 1) Press the DISP button 7 to enter the clock display mode. 2) Press the DISP button 7 for 1 second or more. This enables clock editing. Stopping Playback Temporarily Press the Play/Pause button %. Press the button again to resume playback. Ejecting Cassette Tapes Press the Eject button 5. The cassette tape is ejected. * The editable fields will be indicated by flash. 3) To move between the hour and minute fields, use the SRCH Left (hour) and Right (minute) buttons $. 4) To confirm the clock setting, press the DISP button 7. Fast-Forwarding and Rewinding Use the SRCH Left and Right buttons $. [. . . ] Measure Replace with a fuse of the same amperage as the old fuse. Read the attached "Installation/Wire Connection Guide" once again and wire properly. Remove all connecting wires from the power ANT lead, and turn the unit on, then re-connect a wire one by one to the power ANT lead. When sound is muted again, check the unit with a wire connected last. Connections are improper. Sound quality is poor. Playback head is dirty. E glis No sound while unit can be operated. Power ANT lead is shorted to the ground. This unit is equipped with a number of self-diagnosis functions to protect the system. [. . . ]