User manual CLARION CJ5600E

[. . . ] Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Screen may be a little dark when the product is operated in low temperature areas. Screen will show normal luminosity after a few minutes. Do not disassemble and modify the product in any way. This may cause fire and/or electric shock. When you install the product in a car and watch monitor, the car engine should be running as there might occur excessive discharge of the car battery. Any liquid leaking into product may cause malfunction. Precautions (when you use the product in a car) The driver should not use the product while he/she is driving. Be cautious of humidity and shock when you use the product in a car. Cover the product when exposed to direct rays of the sun for a long period of time. (You should keep the product at a temperature range of -20°C ~ 70°C. ) 2. Features Application of 5. 6" TFT LCD with high resolution and low reflection All functions are displayed on screen (OSD function) 7 Language Display Selection (ENGLISH-DEUTSCH-ITALIANO-FRANÇAIS-ESPAñONFree voltage (From DC12V to DC24V) Dimmer selection function Picture quality control (PWM control) Camera input (2 system)/Work together with back gear/turn signal ) 3 3. Names of the Buttons English 1 2 [POWER] [MODE] [MENU] [UP] [DOWN] STAND BY LED 4. Operations POWER ON OFF (1) (2) Press [POWER] button to on the power. (STAND BY state is OFF) Press [POWER] button again to off the power. (STAND BY state is ON) MODE (Camera Selection) It is a function to change CAMERA (CAM1/CAM2). (1) (2) Press [MODE] button. CAM1 or CAM2 appears on the screen and it disappears after 5 seconds. CAM1 CAM1 CAM2 Note: In the mirror mode, the character is inverted. 4 3 MENU English It is a function to select MAIN MENU (SETUP, PICTURE CAMERA) (1) Press [MENU] button to select MAIN MENU, changed color in red when it is selected. · Every time the button is pressed, the setting changes. SETUP PICTURE CAMERA (2) Press [MODE] button to select SUB MENU, changed color in red when it is selected. · Every time the button is pressed, the setting changes. SETUP PICTURE DIMMER LANGUAGE DIRECTION RESET ENGLISH 0 CONTRAST BRIGHTNESS COLOR TINT 50 70 50 50 SUB MENU CAMERA CAM1 CAM2 NORMAL NORMAL SET UP (SUB MENU) (3) Press [UP]/[DOWN] button to change Settings. DIMMER ­ LANGUAGE ENGLISH ­ ­ DEUTSCH ­ ITALIANO ­ FRANÇAIS ­ ESPAñON ­ 5 DIRECTION (Inverted upside down) DIMMER LANGUAGE DIRECTION RESET 40 40 70 40 DIMMER LANGUAGE DIRECTION RESET ENGLISH 0 RESET A factory default reset will clear all of OSD information PICTURE (SUB MENU) (3) Press [UP]/[DOWN] button to change Settings. CONTRAST BRIGHTNESS CONTRAST BRIGHTNESS COLOR TINT 70 40 40 40 CONTRAST BRIGHTNESS COLOR TINT 40 70 40 40 CONTRAST BRIGHTNESS COLOR TINT TINT CONTRAST BRIGHTNESS COLOR TINT 40 40 40 50 CAMERA (SUB MENU) (3) Press [UP]/[DOWN] button to change Settings. In the mirror mode, the screen is inverted laterally. CAM1 CAM2 NORMAL NORMAL 6 ENGLISH 180 English COLOR 5. Connections English (Sold Separately) CAMERA1 *1 CAMERA2 (Sold Separately) *1 GREEN BLACK (CAMERA2) (CAMERA1) CAMERA2 CAMERA1 *2 *2 *3 *3 *1 BLACK GROUND RED POWER DC12V~24V *2 *3 Use a Clarion camera. [. . . ] Replace with a fuse of the same amperage (2A). Temperature in the car is below 0°C or over 60°C. Check to see that the temperature in the car is appropriate (around 25°C). English Power does not turn on. 8. [. . . ]