User manual CLARION CMD4

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones Istruzioni per l'uso CMD4 WATERTIGHT MARINE AM/FM/CD MULTIMEDIA CONTROLLER · COMBINÉ NAUTIQUE ÉTANCHE RADIO AM/FMLECTEUR CD MULTIMEDIA · CONTROLADOR MULTIMEDIA MARINO DE AM/FM/ DISCOS CD IMPERMEABLE · UNITÀ DI CONTROLLO MULTIMEDIALE PER USO MARITTIMO AM/FM/CD IMPERMEABILE Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it with this manual. [. . . ] The CD will automatically load after being placed approximately 1/3rd of the way into the CD mechanism. · If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload). · 8 cm CDs are not auto reloaded. Be sure to remove it when ejected. 1. To cancel the scan play, press the [SCAN] button again. 14 CMD4 CD Operations English Repeat play Repeat play continuously plays the current track. This function continues automatically until it is cancelled. To cancel the repeat play, press the [REPEAT] button again. Random play Random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is cancelled. To cancel the random play, press the [RANDOM] button again. Operations Common to Each Mode Setting the clock 1. Press and hold the [MENU] button for 1 second or longer to switch to the menu mode. Press the [a] or [d] button to select "CLOCK". Press the [a] or [d] button to select the hour or the minute. Turn the [ROTARY] knob to set the correct time. The clock is displayed in 12-hour format. Adjusting the bass (Q-curve) The factory default setting is "B-Q 1". Press and hold the [MENU] button for 1 second or longer to switch to the menu mode. Press the [a] or [d] button to select "BASS Q". Turn the [ROTARY] knob to select the Qcurve. Press the [MENU] button to return to the previous mode. 6. Press the [ENT] button to store the time into memory. Press the [MENU] button to return to the previous mode. Note: · You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the boat's battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled. Adjusting the treble (Frequency) The factory default setting is "T-FRQ10K". [. . . ] Sound is bad directly after power is turned on. Source selection does not recognize CeNET source connection. Water droplets may form on the internal lens. CD CeNET The microprocessor has not stored the proper CeNET information. The CeNET cable is not connected properly. Perform a system check. [. . . ]