User manual CLARION DB156

[. . . ] Owner's manual Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. English Contents DB156 CD receiver · · 1. [. . . ] If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit. Note:Be sure to read this chapter referring to the front diagrams of chapter "2. CONTROLS" on page 3 (unfold). English Setting the Z-Enhancer This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer. The factory default setting is "Z-EHCR OFF". Turning on/off the power Note: · Be careful about using this unit for a long time without running the engine. If you drain the car's battery too far, you may not be able to start the engine and this can reduce the service life of the battery. Each time you press the [Z] button, the tone effect changes in the following order: "Z-ENHANCER 1" (bass emphasized) "Z-ENHANCER 2" (treble emphasized) "Z-ENHANCER 3" (bass and treble emphasized) "Z-EHCR OFF" (no sound effect) "Z-ENHANCER 1". . . Audio Mode Adjustments 1. Press the [A-M] button to select the adjustment mode. The mode switches as follows each time the [A-M] button is pressed: BASS TREB BAL FAD Previous mode When the Z-Enhancer function is turned on, BASS (bass) and TRE (treble) cannot be selected. 2. The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode. Press and hold the [SRC] button for 1 second or longer to turn off the power for the unit. Selecting a mode 1. Press the [SRC] button to change the operation mode. Each time you press the [SRC] button, the operation mode changes in the following order: Radio mode CD mode Radio mode. . . Note: · If the CD mode is selected when no disc is inserted, the display shows "NO DISC". 2. Turning the [ROTARY] knob to adjust the selected audio mode. BASS (bass): Adjustment range: ­7 to +7 TREB (treble): Adjustment range: ­7 to +7 BAL (balnce): Adjustment range: L13 to R 13 FAD (fader): Adjustment range: F12 to R12 3. Press the [a] or [d] button to select "CLOCK <E>". Press the [a] or [d] button to select the hour or the minute. Turn the [ROTARY] knob to set the correct time. The clock is displayed in 12-hour format. Press the [ ] button to store the time into memory. Press the [D] button to return to the previous mode. Note: · If you select another operation mode while you are setting the clock, the clock setting operation will be canceled. [. . . ] This function continues on the disc until it is cancelled. The scan play is useful when you want to select a desired track. 1. Press the [SCN] button to start scan play. "SCN" lights in the display. 7. SPECIFICATIONS FM Tuner Frequency Range: 87. 0 MHz to 108. 0 MHz Usable Sensitivity: 11 dBf 50dB Quieting Sensitivity: 17 dBf Alternate Channel Selectivity: 75 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz Audio Maximum Power Output: 204 W (51 W 4 ch) Continuous Average Power Output: 17 W 4, into 4 , 20 Hz to 20 kHz, 1%THD Bass Control Action (100 Hz): ±14 dB Treble Control Action (10 kHz): ±14 dB Line Output Level (CD 1 kHz): 1. 7 V AM Tuner Frequency Range: 531 kHz to 1629 kHz Usable Sensitivity: 25 µV General Power Supply Voltage: 14. 4 V DC (10. 8 to 15. 6 V allowable), negative ground Current Consumption: Less than 15 A Speaker Impedance: 4 (4 to 8 allowable) Weight / Source unit: 1. 1 kg Dimensions / Source unit: 178 mm Width 50 mm Height 155 mm Depth CD Player System: Compact disc digital audio system Usable Discs: Compact disc Frequency Response (±1 dB): 10 Hz to 20 kHz Signal to Noise Ratio (1 kHz): 100 dB IHF-A Dynamic Range (1 kHz): 93 dB Harmonic Distortion: 0. 03% Note: · Specifications and design are subject to change without notice for further improvement. DB156 11 8. [. . . ]