User manual CLARION DB178RMP

[. . . ] Owners manual Mode demploi Bedienungsanleitung Istruzioni per luso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções CD/MP3/WMA RECEIVER RADIO CD/MP3/WMA CD/MP3/WMA-RECEIVER RICEVITORE PER CD/MP3/WMA CD/MP3/WMA-RECEIVER RADIO CD/MP3/WMA CD/MP3/WMA-LÄSARE RECEPTOR CD/MP3/WMA Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". [. . . ] If you press the [TA] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. As "TP" and "TA" lit in the display, press the [TA] button. The "TA" in the display goes off and the TA standby mode is cancelled. If "TP" is not lit, pressing the [TA] button searches for a TP station. English Setting the TA standby mode If you press the [SRC] button, emergency broadcast reception is cancelled. Cancelling an emergency broadcast Volume setting of TA, emergency broadcast (ALARM) and PTY The volume for TA, ALARM and PTY interrupts can be set during TA, ALARM or PTY interrupt. The factory default setting for this volume is "VOL 15". Cancelling the TA standby mode During a TA, ALARM or PTY interrupt, turn the [ROTARY] knob to set the volume to the desired level (0 to 33). When the TA, ALARM or PTY interrupt ends, the volume returns to the level it had before the interrupt. When "TP" is not lit, if you press the [TA] button, "TA" in the display lights and the unit automatically receives a TP station. Note: If a TP station is not received, the unit continues the search operation. Pressing [TA] button again goes off "TA" in the display and stops TP station searching. Searching for a TP station RDS Mode adjustment RDS Mode is one of the Adjustment mode. OTHER OPERATIONS" on page 21 for details. Auto store function for TP stations You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten. ] As "TA" lit in the display, press and hold the [ button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory. Even if you select FM1 or FM2, a TP station is stored into memory for FM3. Emergency broadcast If an emergency broadcast is received, all the Function mode operations are stopped. "ALARM" appears in the display and the emergency broadcast can be heard. 14 DB178RMP / DB179RMP / DB179RGMP CD/MP3/WMA Mode Operations MP3 is an audio compression method and classified into audio layer 3 of MPEG standards. This audio compression method has penetrated into PC users and become a standard format. This MP3 features the original audio data compression to about 12 percent of its initial size with a high quality sound. This means that about 10 music CDs can be recorded on a CD-R disc or CD-RW disc to allow a long listening time without having to change CDs. English What is MP3? MP3 Decode Format Sampling Rate (kHz) Bit-rate (kbps) MPEG 1, 2 and 2. 5 - Layer 3 MPEG-1 : 32, 44. 1, 48 MPEG-2 : 16, 22. 05, 24 MPEG-2. 5 : 8, 11. 025, 12 MPEG-1 : 32 - 320 MPEG-2 : 8 - 160 MPEG-2. 5 : 8 - 160 VBR 48, 44. 1, 32 32 - 192 WMA Sampling rate (kHz) Bit-rate (kbps) WMA is the abbreviation of Windows Media Audio, an audio file format developed by Microsoft Corporation. Notes: WMA file with DRM (Digital Rights Management) will be skipped from being playback and jump to the next track. Windows MediaTM, and the Windows® logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. What is WMA? Folder Level Limit Max. Files Support Folder Name File Name : 8 Level : 254 : Max. When using Windows Media Player 9, click on TOOL OPTIONS MUSIC RECORD tab, then under Recording settings, unclick the check box for RECORD PROTECTED MUSIC. When using Windows Media Player 10/11, click on TOOL OPTIONS RIP MUSIC tab, then under Rip settings, unclick the check box for COPY PROTECT MUSIC. Then, reconstruct files. Note: Personally constructed WMA files are used at your own responsibility. To disable DRM (Digital Rights Management): Always add a file extension ". MP3" or ". WMA" to MP3 or WMA file by using single character letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select "ISO9660 level 1, 2 or JOLIET or Romeo" as the writing software format. Normal play may not be possible if the disc is recorded on another format. The folder name and file name can be displayed as the title during MP3/WMA play but the title must be within 28 single byte alphabetical letters and numerals (including an extension) respectively. Do not affix a name to a file inside a folder having the same name. [. . . ] Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates). If the sound is muted again, consult our service department. DB178RMP / DB179RMP / DB179RGMP Troubleshooting Problem No sound heard. Cause MP3/WMA files are absent in a disc. [. . . ]