User manual CLARION DB348RMP

[. . . ] Owner's manual / Mode d'emploi Bedienungsanleitung / Istruzioni per l'uso Gebruiksaanwijzing / Manual de instrucciones Bruksanvisning / Manual de instrues DB348RMP AM/FM MP3 CD PLAYER RADIO AM/FM-LECTEUR CD/MP3 AM/UKW MP3 CD-SPIELER SINTOLETTORE CD MP3 AM/FM AM/FM MP3 CD-SPELER REPRODUCTOR DE AM/FM CD/MP3 AM/FM-RADIO OCH CD/MP3-SPELARE COMBINAO DE RDIO AM/FM, LEITOR DE CDs e MP3 Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. CAUTIONS: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". [. . . ] Press the corresponding [DIRECT] button to recall the stored station. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory. 1. Press the [BND] button and select the desired band (FM or AM (MW/LW)). Press and hold the [PS/AS] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels. If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. When a desired station is tuned in, press the [PS/AS] button again to continue receiving that station. Note: Be careful not to press and hold the [PS/AS] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. 14 DB348RMP RDS Operations English RDS (Radio Data System) This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data. This system can display the name of the broadcast station being received (PS) and can automatically switch to the broadcast station with the best reception as you move long distances (AF switching). Also, if a traffic announcement or programme type is broadcast from an RDS station, no matter what mode you are in, this broadcast is received. Additionally, if EON information is received, this information enables automatic switching of other preset stations on the same network and interruption of the station being received with traffic information from other stations (TP). This function is not available in some areas. When using the RDS function, always set the radio to FM mode. AF : Alternative Frequency PS : Programme Service Name PTY : Programme Type EON : Enhanced Other Network TP : Traffic Programme RDS interrupt does not function during AM radio reception. Notes: This function is disabled when a national station such as BBC R2 is being received. The REG function ON/OFF setting is valid when the AF function is ON. qSwitching the REG function ON Press and hold the [AF] button for 1 second or longer. "REG" in the display lights and the REG function turns on. qSwitching the REG function OFF Press and hold the [AF] button for 1 second or longer. "REG" in the display goes off and the REG function turns off. Manually tuning a regional station in the same network 1. This function is valid when the AF function is ON and the REG function is OFF. Note: This function can be used when a regional broadcast of the same network is received. AF function The AF function switches to a different frequency on the same network in order to maintain optimum reception. The factory default setting is "ON". 2. Press any one of the [DIRECT] buttons to call out the regional station. If the reception condition of the called out station is bad, press the [DIRECT] button of the same number. [. . . ] (No sound is produced. ) Cause Fuse is blown. Solution Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Eject the compact disc before loading the new one. [. . . ]