User manual CLARION DB568RUSB

[. . . ] Owners manual Mode demploi Bedienungsanleitung Istruzioni per luso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções CD/USB/MP3/WMA RECEIVER RECEPTEUR CD/USB/MP3/WMA CD/USB/MP3/WMA RECEIVER RICEVITORE CD/USB/MP3/WMA CD/USB/MP3/WMA ONTVANGER RECEPTOR PARA CD/USB/MP3/WMA CD/USB/MP3/WMA MOTTAGARE RECEPTOR PARA CD/USB/MP3/WMA Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". [. . . ] Pressing [TA] button again goes off "TA" in the display and stops TP station searching. Searching for a TP station Manually tuning a regional station in the same network 1. This function is valid when the AF function is ON and the REG function is OFF. Note: This function can be used when a regional broadcast of the same network is received. Auto store function for TP stations 2. Press any one of the [DIRECT] buttons to call out the regional station. If the reception condition of the called out station is bad, press the [DIRECT] button of the same number. The unit receives a local station on the same network. You can automatically store up to 6 TP stations into preset memory. If the number of TP can be received less than 6, broadcast stations already stored in memory and left without being overwritten. 16 DB568RUSB RDS Operations ] As "TA" lit in the display, press and hold the [ button for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory. Even if you select FM1 or FM2, a TP station is stored into memory for FM3. English Selecting PTY 1. Press and hold the [A] button for 1 second or longer to switch to the RDS adjustment selection display. Press the [ , ] button to select "PTY-S RDS MODE adjustment ] button. Press and hold the [A] button for 1 second or longer to select the RDS MODE. The mode switches as follows each time the [ ] button is pressed: , PTY ON REG ON2 PTY-S<E>1 PTY ON . . . . Alternatively, turn the [ROTARY] knob to select the desired PTY. Press the [A] button to return to the previous mode. Below are the factory default settings stored for the [DIRECT] buttons. Preset number 1 2 3 4 5 6 PTY item ENGLISH Contents News Info Pop M Sport Classics Easy M Press [A] button to exit RDS MODE. Notes: 1 "PTY-S<E>" only available when "PTY ON". 2 "REG ON" only available when "AF ON". PTY This function enables you to listen to a broadcast of the selected programme type even if the unit is on a Function mode other than radio. Some countries do not yet have PTY broadcast. In the TA standby mode, a TP station has priority over a PTY broadcast station. The factory default setting is "OFF". News Information Pop Music Sport Serious Classical Music Easy Listening Music The PTY select mode is cancelled automatically 7 seconds after a PTY is selected. 1. Press and hold the [A] button for 1 second or longer to switch to the RDS adjustment selection display. Press the [ , ] button to select "PTY". Turn the [ROTARY] knob to select "ON" or "OFF". "PTY" in the display lights and PTY standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display. OFF: "PTY" in the display goes off and PTY standby mode is cancelled. PTY seek 1. Press and hold the [A] button for 1 second or longer to switch to the RDS adjustment selection display. Press the [ , ] button to select "PTY-SEL ] button. ON: ] button to search for a PTY 4. Press the [ broadcast in the direction of higher frequen] button to search in the cies; press the [ direction of lower frequencies. If no station with the selected PTY broadcast can be received, the unit returns to the previous receiving station. 4. [. . . ] File system is not correct. Let dry for about 1 hour with the power on. Wrong filename Use ISO9660 level 1, 2 or JOLIET or Romeo file system. Problem No sound heard. Cause MP3/WMA files are absent in a USB drive. Files are not recognized as an MP3/WMA file. Measure Write MP3/WMA files onto the USB drive properly. Use MP3/WMA files encoded properly. Sound is cut or skipped. Noise is generated or noi se is mi xed with sound. [. . . ]