User manual CLARION DB625MP

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones AM/FM CD/MP3 PLAYER · COMBINE RADIO AM/FM CD/MP3 · SINTONIZADOR DE AM/FM Y REPRODUCTOR DE DISCOS COMPACTOS/MP3 Clarion Co. , Ltd. 2002/3 (A·K) All Rights Reserved. Copyright © 2002: Clarion Co. , Ltd. Printed in Malaysia / Imprimé à Maiaisie / Impreso en Maiasia PE-2549B 280-7815-00 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Select the band for Auto Store Entry Press the [FM] or [AM] button. Open Auto Store Entry Press the [T-M] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Store Entry closes. Preset Tuning Calling up the stations in the memory. Select the band Press the [FM] or [AM] button. Call up the station Press the [PRESET] button. Tuning Selecting the station. Select tuner source Press the [FNC] button. Select the band Press the [FM] or [AM] button. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. Tune up or down band Press the [a] or [d] button. Changing the reception area This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below. G Setting the reception area 1. If the Reset button is pressed while pressing [PRESET 1] and [PRESET 5], reception area will switches from inside the USA to outside the USA or from outside the USA to inside the USA. Any station preset memories are lost when the reception area is changed. Note: · During reception of stereo stations the "ST" indicator is ON. Station Preset Memory Putting the station in the memory. Select the band Press the [FM] or [AM] button. Select the frequency to put in the memory Press the [a] or [d] button. Put the frequency in the memory Press the [PRESET] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [PRESET] button. CRSC (Clean Reception System Circuit) <In FM reception> Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Display Setting "CRSC ON" The CRSC is ON. "CRSC OFF" The CRSC is OFF. Note: · Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. 16 DB625MP CD/MP3 Operations Playing CD & MP3 G When there is no disc inserted 1. Drop open the faceplate Press the [OPEN] button. Press the faceplate on the right side, and return it to its former position. CAUTION 3 in. [. . . ] Record in conformity with the ID 3 tag version1. x. Make sure there's recorded content in the MP3 media. Noise or no sound generated when an MP3 is played. Takes time before the unit starts playing MP3. The track has the MP3 track name extension while it is not an MP3. The medium contains many folders, tracks, and hierarchical levels. [. . . ]