User manual CLARION DRX8575Z

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones DRX8575z AM/FMCDPLA YER WITHCD/MDCHANGERCONTROL · COMBINÉRADIO/CDAM/FMAVECPILOTE DECHANGEURCD/MD · RADIODEAM/FMYREPRODUCTORDEDISCOS COMP ACTOSCONCONTROLDECAMBIADOR DEDISCOSCOMPACTOS/MINIDISCOS OPEN DRX8575z Clarion Co. , Ltd. 1998/10 (W·C) All Rights Reserved. Copyright © 1998: Clarion Co. , Ltd. Printed in China / Imprimé en Chine / Inpreso en China ISR 1 2 3 4 5 6 PE-2171B 280-7229-00 Thank you for purchasing the Clarion DRX8575z. Please read this owner's manual in its entirety before operating this equipment. [. . . ] Pressing ENT button 2 returns to the adjustment selection display. Press ADJ button 4 to return to the previous mode. 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button % to select "MESSAGE". Turn the Rotary knob & clockwise to set the message display to "ON"; turn it counterclockwise to set the message display to "OFF". Pressing ENT button 2 returns to the adjustment selection display. Press ADJ button 4 to return to the previous mode. Setting the SEARCH button illumination color (Prism function) The change in the SEARCH button illumination color according to the unit operating state is called the "Prism function". You can set the illumination pattern you prefer. The factory default setting is "PATTERN 1". NON-FADER output adjustment display ON/OFF If you do not want to adjust the non-fader output level, you can turn off the "NON-FAD VOL" display. The factory default setting is "ON". Even if you set the level adjustment display to "OFF", a signal is output from the non-fader output. 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button % to select "PRISM KEY". Turn the Rotar y knob & clockwise or counterclockwise to set the illumination pattern. Each time you turn the Rotary knob &, the illumination pattern changes in the following order: PATTERN 1 § PATTERN 2 § OFF § PATTERN 1. . . PATTERN 1: The color changes for each function mode, station tuning, scanning and other operations. PATTERN 2: In addition to the changes in Pattern 1, the color changes according to the audio level. OFF: The color changes according to the function mode. Pressing ENT button 2 returns to the adjustment selection display. Press ADJ button 4 to return to the previous mode. 1. Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button % to select "NON-FADER". Turn the Rotary knob & clockwise to set the non-fader output adjustment display to "ON"; turn it counterclockwise to set the non-fader output adjustment display to "OFF". ON: When A-M button $ is pressed, the "NONFAD VOL" item is displayed. You can adjust the output level. OFF: Even when you press A-M button $, the "NON-FAD VOL" item is not displayed. You cannot adjust the output level. 5. [. . . ] ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display ERROR 2 Cause A CD is caught inside the CD deck and is not ejected. A CD cannot be played due to scratches, etc. A CD is loaded upside-down inside the CD deck and does not play. [. . . ]