User manual CLARION DRX9255

[. . . ] After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer and TV tuner connected via the CeNET cable. The CD changer, MD changer and TV tuner have their own manuals, but no explanations for operating them are described. Contents 1. [. . . ] Press the right side of SEARCH button 4 to move the cursor. Press VOLUME buttons 2 up (w) or down (z) to set message display ON or OFF. Pressing ENT button $ returns to the adjustment selection display. Press MODE button & or Press and hold ENT button $ for 1 second or longer to return to the previous mode. Setting the Background Spectrum Analyzer Display of Background Spectrum Analyzer (BG SPE/ANA) When the display is not showing I-BGV, SPE/ANA is shown on the right side of the display. The factory default setting is "ON". Turning the EXTRA output adjustment display on/off When not using the EXTRA output, you can put out the "EXTRA VOL" display. The factory default setting is "ON". Even if the level adjustment display is set to "OFF", signals can be output from the non-fader output. 1. Press MODE button & four times to select the adjustment mode. Press VOLUME buttons 2 up (w) or down (z) to select "BG SPE/ANA". Press the right side of SEARCH button 4 to move the cursor to the right. Press VOLUME buttons 2 up (w) or down (z) to select "ON" or "OFF". Press MODE button & or press and hold ENT button $ for 1 second or longer to return to the previous mode. Select a desired pattern referring to the display indication. Press MODE button & four times to select the adjustment mode. If "NO DISC" appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer. CD Changer Operations q When playing a disc 1 to 6 1. Press Direct button " (1 to 6) with the same number as the CD playing. q When playing a disc 7 to 12 (only when a 12 disc CD changer is used. ) 1. Press Direct button " (7 to 12) with the same number as the CD playing. If a CD is not loaded in a slot of the magazine, pressing Direct button " corresponding to its disc number is invalid. 1. Display the CD-text title (disc, artist or track). Press and hold TITLE button # for 1 second or longer. When you press the RPT button ", repeat play starts. To cancel repeat play, press the RPT button " again. "RPT" goes off from the display and the unit returns to normal play. Disc repeat play After all tracks in the current disc have been played, the disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is cancelled. [. . . ] Compact disc is heavily scratched or warped. 8. Press MODE button & three times or press and hold ENT button $ for 1 second or longer to return to the previous mode. DSP Sound is bad directly after power is turned on. Poor sound quality Water droplets may form on the internal lens when the car is parked in a humid place. The equalizer levels are too high. Gain (G) f 3dB If the equalizer levels are too high, the sound may distort. [. . . ]