User manual CLARION DRX9375R

[. . . ] BUTTON TERMINOLOGY Note: · Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold). Names of Buttons 1 POWER button FUNC (function) button 2 -selector (ALPHA-TOUCH CONTROLLER) 3 Release button 4 DCP/SLOPING CONSOLE 5 Display 6 DISP (display) button 7 PS/AS (preset scan/auto store) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [ SCN (scan) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [ RPT (repeat) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select left or right until "M/S ACT" is displayed using -selector 2. 3 3. Select up or down to select the desired language using -selector 2. 3 3. Select up or down to turn "on" or "off" using -selector 2. 3 4. Press ADJ button % to return to radio mode. Volume setting of TA, emergency (ALARM) and PTY You can set the volume of TA, ALARM and PTY to a desired level. * The factory setting is "TA VOL 9". 4. Press ADJ button % again to return to radio mode display. Note: · When you receive speech data with the M/S function set to "on" while a DSP/EQ such as DPH9300, DPH7300 and EQH5100 etc. is connected to this unit, the unit invalidates the DSP/EQ adjustments. * When receipt of speech data has finished, the sound quality returns to the original bass/treble adjustment level or the sound level set on the DSP/ Equalizer. 1. Press and hold TA button 0 for 2 seconds or longer to enter TA VOL ADJ mode. If the control is idle for 7 seconds after the TA VOL ADJ mode has been entered, the display returns to radio mode display automatically. Select up or down to set the volume level using -selector 2. 3 CT (Clock Time) function The CT function enables you to display clock time only when CT data is received. Press DISP button 6 to switch the display to the CT indication. * When CT data is not received, "CT­ ­ : ­ ­ " is displayed. * The volume remains unchanged if the volume before the TA, ALARM and PTY broadcasts are received is higher than the previously set volume. If it is lower, the volume changes to the level set in TA VOL ADJ mode. Note: · There are some countries and stations where clock time data are not transmitted. In some areas, the CT may not be displayed correctly. 3. Press TA button 0 to complete volume setting. DRX9375R/DRX9375RW 19 CD Operations CD mode Circle indication Function mode indication Title indication Disc in indication Single disc indication Random indication Repeat indication Scan indication Loading a CD 1. Press OPEN button * to open the SLOPING CONSOLE. Notes: · Note that SLOPING CONSOLE closes immediately after a CD is inserted into the CD insertion slot. · Do not put your hand, fingers, or foreign objects into the CD insertion slot. ·If a CD has already been loaded, another CD cannot be inserted. ·The SLOPING CONSOLE closes if no CD is loaded for 30 seconds. · Discs not bearing the mark cannot be played with the unit. · Single CDs (8 cm) shall be loaded without adapter into the right side of the slot. " " lights in the display. Note: · When opening and closing SLOPING CONSOLE, be careful not to let your hand or fingers get caught in the panel. 2. Insert a CD into the center of the CD insertion slot with the labeled side facing up. [. . . ] Sound is bad directly after power is turned on. Nothing happens when buttons are pressed. Display is not accurate. Water droplets may form on Let dry for about 1 hour with the power on. the internal lens when the car is parked in a humid place. [. . . ]